[Battlemesh] ubnt nanobeam XW LAN - unstable

Ufo ufo at rund.freifunk.net
Thu Jul 30 23:19:24 UTC 2015


in older openwrt releases you have to take a look into the network
config in /etc/config to set eth0 manually

even more problem of xw-hardware (only these with only one LAN) is the
unstable ethernet (done by hardware layout):
https://dev.openwrt.org/ticket/19085

so take care, and configure same wifi settings on all these backbone
devices.. so the backbone mesh to internet will not fail, when
ethernet-ports are failing.. (oh, stock openwrt without mesh?)

otherwise the internet connection of battlemesh will be the live-testbed
 :-)

ufo


Am 30.07.15 um 20:54 schrieb Mitar:
> Hi!
> 
> Yes, just backbone for Internet access.
> 
> 
> Mitar
> 
>> Hi,
>>
>> you are talking about a backbone for Internet access not testbed, right?
>> For testbed CC will be employed for sure?
>>
>> Kind regards
>> Demos
>>
>> On 30.07.2015 18:43, Musti wrote:
>>> Hi,
>>>
>>> just trying to use it in default configuration, stock openwrt.
>>>
>>> Kind regards,
>>> Musti
>>>
>>> On 30.7.2015 17:06, Pedro wrote:
>>>> Ubiquiti XW models have a new problem with its internal switch. Its ethernet
>>>> interface can only transport VLAN or untagged data. Are you trying to
>>>> mix it? Is this the problem?
>>>>
>>>> On Thu, Jul 30, 2015 at 10:31 AM, Musti <musti at wlan-si.net> wrote:
>>>>> Hi,
>>>>>
>>>>> yes, these are new ones. Old ones NanoBridge work without problem.
>>>>>
>>>>> Kind regards,
>>>>> Musti
>>>>>
>>>>> On 30.7.2015 10:17, Dave Taht wrote:
>>>>>> These are the new ones?
>>>>>>
>>>>>> I brought 2 of the old ones. Working with a build done several weeks ago.
>>>>>>
>>>>>> On Thu, Jul 30, 2015 at 9:33 AM, Musti <musti at wlan-si.net> wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> we are upgrading backbone to Battlemesh venue and have a few NanoBeam M5
>>>>>>> devices to deploy, however with openwrt CC or BB, LAN port does not come
>>>>>>> up. Does anyone have a working configuration, any ideas or can get in
>>>>>>> touch with me and help debug this.
>>>>>>>
>>>>>>> The problem is present with our won build as well as openwrt stock build.
>>>>>>>
>>>>>>> Kind regards,
>>>>>>> Musti
>>>>>>> _______________________________________________
>>>>>>> Battlemesh mailing list
>>>>>>> Battlemesh at ml.ninux.org
>>>>>>> http://ml.ninux.org/mailman/listinfo/battlemesh
>>>>>>
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> Battlemesh mailing list
>>>>> Battlemesh at ml.ninux.org
>>>>> http://ml.ninux.org/mailman/listinfo/battlemesh
>>>> _______________________________________________
>>>> Battlemesh mailing list
>>>> Battlemesh at ml.ninux.org
>>>> http://ml.ninux.org/mailman/listinfo/battlemesh
>>>>
>>> _______________________________________________
>>> Battlemesh mailing list
>>> Battlemesh at ml.ninux.org
>>> http://ml.ninux.org/mailman/listinfo/battlemesh
>>>
>>
>>
>>
>> _______________________________________________
>> Battlemesh mailing list
>> Battlemesh at ml.ninux.org
>> http://ml.ninux.org/mailman/listinfo/battlemesh
>>
> 


-- 
---
Freifunk Leipzig http://leipzig.freifunk.net


More information about the Battlemesh mailing list