[Battlemesh] Gigabit switch/router openwrt with SFP

[Ben West]

You're meaning that the SFP version only supplies POE on its 5 ports; can't
be itself powered via POE, right?  Or, that the non-SFP version does
support being itself powered via POE, but them only passes that onto one of
its 5 ports?

At any rate, the Edge Router's hardware acceleration (i.e. for high NAT
throughput) is thus far still only available with stock firmware.
Apparently, the open source support for Cavium is largely in name only.
Getting useful info like datasheets and API docs requires an NDA.

Excellent device otherwise.


On Tue, Apr 12, 2016 at 10:43 AM, Musti <musti at wlan-si.net> wrote:

> Hi,
>
> thanks for the suggestion, however there is no PoE for the SFP version
> and the non-SFP version has only one PoE out.
>
> So unfortunately it is not suitable, excepot in terms of the processor.
>
> Kind regards,
> Musti
>
> On 12.4.2016 17:34, fboehm wrote:
> > Am 12.04.2016 um 16:10 schrieb Musti:
> >> Requirements:
> >> - runs openwrt
> >> - gigabit switch with one SFP port
> >> - PoE in and out
> >> - gpio/uart somewhat exposed or on some pads
> >
> > What about this product:
> > https://www.ubnt.com/edgemax/edgerouter-x-sfp/
> >
> > A nice bonus is its pretty beefy dual-core 880MHz MIPS CPU. OpenWRT
> > support should be rather easy because OpenWRT supports other boards with
> > the same SoC.
> >
> > Franz
> > _______________________________________________
> > Battlemesh mailing list
> > Battlemesh at ml.ninux.org
> > http://ml.ninux.org/mailman/listinfo/battlemesh
> _______________________________________________
> Battlemesh mailing list
> Battlemesh at ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/battlemesh
>



-- 
Ben West
http://gowasabi.net
ben at gowasabi.net
314-246-9434
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ml.ninux.org/pipermail/battlemesh/attachments/20160412/ccdaab66/attachment.htm>