<blockquote style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;" class="gmail_quote">
I do not understand. Once routes are in place it routes traffic. And it<br>
routes traffic based on the bandwidth. And the bandwidth is the limiting<br>
factor. And not number of routes existing. No?<br></blockquote><br>Yes. But when the device is using 100% of CPU cannot route at the same speed that when CPU is at 10-20%.<br>Each mesh protocol have an important overhead on CPU load, and fonera's CPU is a shit... <br>

So if you are runing 5 mesh protocols inside the same device, the bandwidth and packet losses are very high, and you cannot test persistent protocols like TCP.<br>
<br>An example: In our community (<a href="http://guifi.net" target="_blank">guifi.net</a>) we have some mesh clouds. The biggest one has arround 20 nodes. Normaly we are using ALIX (x86 500Mhz), and we are able to transfer at 20-30 Mbit/s in 1 hop. The CPU overhead is not more than 10%.<br>


However ALIX are very expensive, and we tried to use Nanostation5 (which is like a fonera but a little better). then, running three protocols at same time (BATMAN, OLSR and BMX) we didn't get a bandwidth higher than 6-7Mbit/s in 1 hop because the CPU is at 100% all time.<br>


Now apply this to a less powerful device (fonera), using 2.4Ghz (more noise) and making more than 1 hop. Maybe you get 20-30kbit/s? I really don't know, but with this kind of bandwidth you cannot test VOIP or Streaming or Whatever in layer7.<br>


<br>Hey! I made some tests the last night of WBMv4, and my experience was that with this kind network we cannot have conclusions or a real battle, ICMP are the only packets that you can use. Nowadays that is not a real "example" of mesh network.<br>


<br clear="all">--<br>./p4u<br><br>
<br><br><div class="gmail_quote">2011/9/22 Mitar <span dir="ltr"><<a href="mailto:mitar@tnode.com" target="_blank">mitar@tnode.com</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">


Hi!<br>
<div><br>
> It depends on what are you understanding for "run". If run for you is to be<br>
> able to make a ping with less than 50% of losses, then yes is works. But if<br>
> you understand run as a network where you can do layer7 tests, then you<br>
> cannot say they run.<br>
> There is several overhead and high cpu load using 5 mesh protocols at same<br>
> time, and fonera is not designed for that.<br>
<br>
</div>I do not understand. Once routes are in place it routes traffic. And it<br>
routes traffic based on the bandwidth. And the bandwidth is the limiting<br>
factor. And not number of routes existing. No?<br>
<font color="#888888"><br>
<br>
Mitar<br>
<br>
</font></blockquote></div><br>