[ninux-not-wireless] 536Mhz Atmel Cortex A5 ARM 1giga eth + 100mega eth + 2GB RAM

[mutek]

tra le mail varie mi è arrivata questa roba nuova:

la board:

http://www.element14.com/community/docs/DOC-65651?CMP=SOM-ATMEL-XPLAINED-GP

la cpu (ha un crypto engine AES è buono per comunicare direttamente con la
NSA)

http://www.atmel.com/devices/sama5d36.aspx


vi riporto qui sotto:
CPU:

Pin Count: 324
Max. Operating Freq. (MHz): 536 MHz
CPU: Cortex-A5
Max I/O Pins: 160
Ext Interrupts: 160
USB Transceiver: 3
USB Speed: Hi-Speed
USB Interface: Host, Device
SPI: 6
TWI (I2C):3
UART:7
CAN:2
LIN:4
SSC:2
Ethernet:2
SD / eMMC:3
Graphic LCD:Yes
Camera Interface:Yes
ADC channels:12
ADC Resolution (bits):12
ADC Speed (ksps):1000
Resistive Touch Screen:Yes
Crypto Engine:AES/DES/SHA/TRNG
SRAM (Kbytes):128
External Bus Interface:1
DRAM Memory:DDR2/LPDDR, SDRAM/LPSDR
NAND Interface:Yes
Temp. Range (deg C):-40 to 105
I/O Supply Class:1.8/3.3
Operating Voltage (Vcc):1.08 to 1.32
FPU:Yes
Timers:6
Output Compare channels:6
Input Capture Channels:6
PWM Channels:4
32kHz RTC:Yes
MPU / MMU:No / Yes

BOARD:
    SAMA5D36 Cortex-A5 Microprocessor
    2GBit DDR2 - Micron
    2GBit Flash - Micron
    1- Ethernet 10/100/1000
        Phy + connector
    1- Ethernet 10/100
        Phy + connector
    1- USB Device connector, 2- USB Host connectors
    Active Semi PMIC
    Power measurement straps
    SD/MMCPlus 8-bit Card slot
    1- Micro SDCard 4-bit slot footprint
    1- 6-lead 3V3-level serial port
    10-pin J-TAG connector
    2- push buttons, reset and startup
    1- general purpose push button
    2- general purpose LEDs
    Arduino R3-compatible header plus LCD connectors mounted
    Linux distribution
    Bare Metal C code example
    Headless Android support


Overview



The Atmel SAMA5D3 Xplained evaluation kit (ATSAMA5D3-XPLD) is a fast
prototyping and low cost evaluation platform for microprocessor-based
design. The board based on  Atmel’s SAMA5D3 ARM Cortex®-A5 processor comes
with a rich set of ready to use connectivity and storage peripherals and
expansion headers for easy customization. A USB device connector can be
used to power the board as well as programming and debugging it. It also
comes with a free of charge Linux distribution including Linux Kernel 3.10
(LTS), Linux Mainline and Yocto 1.5.1 support. Bare metal developers
benefit from a complete C software package including many examples to get
started fast. The board is also a perfect development platform for
headless Android.


The ATSAMA5D3-XPLD Xplained evaluation kit is based on the SAMA5D3 Atmel’s
ARM® Cortex®-A5 processor-based MPU. The SAMA5D3 series MPUs deliver that
balance in a rich set of devices that meets your every industrial design
need. The SAMA5D3 series is also ideal for wearable computing and mobile
applications where low power and a small footprint are critical.  By
designing with the new Atmel® SAMA5D3 series, you alleviate any trade-offs
in performance, power and ease of use.


The ATSAMA5D3-XPLD Xplained board is pre-loaded with a Linux-based
embedded operating system. The software components stored in the NANDFlash
have been compiled following instructions found on the Linux4SAM website.
The on-board pre-installed Linux distribution can be controlled through
the standard Linux console accessible via the Atmel SAMA5D3 DBGU (standard
debug interface (J23)). An additional USB-CDC console is configured and
can be directly accessed using the USB Micro-AB cable included in the
evaluation kit. This is an efficient single-cable solution for easy log-in
and fast access to the pre-installed Linux distribution.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ATSAMA5D3XPLD_blk.png
Type: image/png
Size: 433296 bytes
Desc: not available
URL: <http://ml.ninux.org/pipermail/not-wireless/attachments/20140304/fb4a9727/attachment-0003.png>