<div></div>Salve ragazzi,sicuramente stò configurando un router con nodogsplash e relativa paginetta in html.<br>funziona regolarmente su tutta la lan/wan internet,il problema viene fuori quando non è presente il gateway internet esce la pagina impossibile contattare il server .<br><br>come si può risolvere il problema si chiama un indirizzo esterno e non è presente internet?<br><br>questo il config openwrt caos calmer 15.05<br>------------------------------------------------------------------------------<br>config instance<br>&nbsp; # Set to 1 to enable nodogsplash<br>&nbsp; option enabled 1<br><br>&nbsp; # Use plain configuration file as well<br>&nbsp; #option config '/etc/nodogsplash/nodogsplash.conf'<br>&nbsp; option network 'WIRELESS'<br>&nbsp; option gatewayname 'Ninux '<br>&nbsp; option maxclients '250'<br>&nbsp; option idletimeout '1200'<br><br>&nbsp; # Your router may have several interfaces, and you<br>&nbsp; # probably want to keep them private from the network/gatewayinterface.<br>&nbsp; # If so, you should block the entire subnets on those interfaces, e.g.:<br>&nbsp; # list authenticated_users 'block to 192.168.0.0/16'<br>&nbsp; # list authenticated_users 'block to 10.0.0.0/8'<br><br>&nbsp; # Typical ports you will probably want to open up.<br>&nbsp;&nbsp; list authenticated_users 'allow tcp port 22'<br>&nbsp;&nbsp; list authenticated_users 'allow tcp port 53'<br>&nbsp;&nbsp; list authenticated_users 'allow udp port 53'<br>&nbsp;&nbsp; list authenticated_users 'allow tcp port 80'<br>&nbsp;&nbsp; list authenticated_users 'allow tcp port 443'<br><br>&nbsp; # For preauthenticated users to resolve IP addresses in their<br>&nbsp; # initial request not using the router itself as a DNS server,<br>&nbsp;&nbsp; list preauthenticated_users 'allow tcp port 53'<br>&nbsp;&nbsp; list preauthenticated_users 'allow udp port 53'<br><br>&nbsp; # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS<br>&nbsp;&nbsp; list users_to_router 'allow tcp port 22'<br>&nbsp;&nbsp; list users_to_router 'allow tcp port 23'<br>&nbsp;&nbsp; list users_to_router 'allow tcp port 53'<br>&nbsp;&nbsp; list users_to_router 'allow udp port 53'<br>&nbsp;&nbsp; list users_to_router 'allow udp port 67'<br>&nbsp;&nbsp; list users_to_router 'allow tcp port 80'<br>&nbsp;&nbsp; list users_to_router 'allow tcp port 443'<br><br>&nbsp; # See https://github.com/nodogsplash for a full list of available options.<br><br><br>grazie<br><br>Andrea<br><br>