[Bologna] Fwd: [lime-users] Splash again
ThEgAmEr
xthegamerx a gmail.com
Mer 31 Maggio 2017 17:39:42 CEST
---------- Forwarded message ----------
From: Nicolas Pace <nico a libre.ws>
Date: Tue, May 23, 2017 at 7:39 AM
Subject: Re: [lime-users] Splash again
To: libremesh users <lime-users a lists.libremesh.org>
Hi Guys,
We ended up implementing a captive portal by ourselves.
We are polishing it up, you can look at it here:
https://github.com/libremesh/pitbull
Regards,
On Mon, 2017-05-22 at 17:45 -0300, bruno vianna wrote:
> hey amuza,
>
> i have nodogsplash working like you described, just the captive page,
> on lime 1607.
>
> i checked your nodogsplash.conf. i had comment out the line
>
> EnablePreAuth yes
>
> to get it to work. Can you try that and let us know if it works?
>
> bruno
>
> On Mon, May 22, 2017 at 4:18 PM, Amuza <amuza a riseup.net> wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > Hi again,
> >
> > I still would like to have Nodogsplash or any captive portal
> > solution
> > working. I don't need authentication, just a splash page. As you
> > could
> > see on my previous message on the thread (below), I was not able to
> > make it work.
> >
> > Is there anyone around using Nodogsplash -or any other captive
> > portal-
> > willing to share their recipe for success?
> >
> > Or maybe have a look into my previous message on the thread,
> > including
> > the "nds" file I attached -which showed Nodogsplash status, logs
> > and
> > config- and let me know if anything looked wrong?
> >
> > Thanks.
> >
> > By the way, there is a new Nodogsplash maintenance release [1],
> > just
> > in case anyone is interested...
> >
> > [1] https://github.com/nodogsplash/nodogsplash/releases/tag/v1.0.2
> >
> >
> >
> > On 06/04/17 19:01, Amuza wrote:
> > >
> > >
> > > On 13/03/17 19:55, Pau wrote:
> > > > You can try to install this firmware which includes standard
> > > > nodogsplash and its dependencies into the gateway node:
> > > > http://chef.libremesh.org/tmp_builds/ar71xx-generic-16_07/
> > >
> > > Thank you! Sorry for the long silence.
> > >
> > > > And then install with opkg the patched Nodogsplash from Gui and
> > > > apply the configuration that he proposes.
> > >
> > > I installed the firmware Pau prepared. Then I followed Bruno's
> > > instructions, that is, Nodogsplash installation and configuration
> > > (I think both from Gui). But have not been able to make it work.
> > >
> > > I can only access the Internet if I disable Nodogsplash. But if I
> > > enable it, I cannot access the Internet and I do not see any
> > > splash
> > > page .
> > >
> > > I cannot ping the router. And the browser does not show anything
> > > if
> > > I enter my-router-IP-addresss:2050 in the address bar.
> > >
> > > If you want to to have a look on nodogsplash status, logs and
> > > config please see the attachment.
> > >
> > > Thanks!
> > >
> > >
> > >
> > > > I might be that you need some opkg --force option, check the
> > > > help of opkg.
> > > > Cheers.
> > >
> > >
> > > > On 13/03/17 18:53, bruno vianna wrote:
> > > > > Amuza, did you try running
> > > > >
> > > > > opkg update
> > > > >
> > > > > before trying to install the nodogsplash package?
> > > > >
> > > > >
> > > > >
> > > > > On Mon, Mar 13, 2017 at 10:02 AM, Pau <pau a dabax.net> wrote:
> > > > > >
> > > > > >
> > > > > > On 12/03/17 20:34, Amuza wrote:
> > > > > > > > AFAIK for the moment there are not plans for
> > > > > > > > implementing this. But you could open an issue in
> > > > > > > > github
> > > > > > > > so it will be more visible to someone able to implement
> > > > > > > > it.
> > > > > > >
> > > > > > >
> > > > > > > I'm not sure if I did right, I don't know much about
> > > > > > > Github. I created it at libremesh/lime-packages. Let me
> > > > > > > know if I should modify anything. I'm amuuza there.
> > > > > > >
> > > > > > > https://github.com/libremesh/lime-packages/issues/76
> > > > > > >
> > > > > > > > Right now, maybe the easiest is to install Nodogsplash
> > > > > > > > into the gateway(s) node(s).
> > > > > > >
> > > > > > >
> > > > > > > Then it is clear, with my limited knowledge and time, I
> > > > > > > have to go for the easiest solution.
> > > > > > >
> > > > > > > I have been trying to follow Bruno's advice, but I have
> > > > > > > not been able to install Nodogsplash.
> > > > > > >
> > > > > > > Please see below my installation attempt.
> > > > > > >
> > > > > > > I also tried to install the dependencies from Barrier
> > > > > > > Breaker with the same unfruitful results.
> > > > > > >
> > > > > > > And, by the way, why can't I install packages from the
> > > > > > > web?
> > > > > >
> > > > > > Because the current libremesh repository does not have all
> > > > > > the packets available on openwrt. In this case
> > > > > > iptables-mod-ipopt.
> > > > > >
> > > > > > I'll try to create a firmware for you with nodogsplash
> > > > > > installed and all the dependencies in the next hours.
> > > > > >
> > > > > > Cheers.
> > > > > >
> > > > > > > --------------------------------------------------
> > > > > > > root a LiMe-682c94:~# opkg install nodogsplash Unknown
> > > > > > > package 'nodogsplash'. Collected errors: *
> > > > > > > opkg_install_cmd: Cannot install package nodogsplash.
> > > > > > > root a LiMe-682c94:~# root a LiMe-682c94:~# opkg install
> > > > > > > http://chef.altermundi.net/downloads/r44952/ar7
> > > > > > > 1xx/packages/routing/nodogsplash_0.9_beta9.9.9-2-
> > > > > > > 20150718_043129_a
> >
> > r
> > >
> > > > > > >
> >
> > 71xx.
> > > > > > >
> > > > > > >
> > >
> > > ipk
> > > > > > > Downloading
> > > > > > > http://chef.altermundi.net/downloads/r44952/ar71xx/packag
> > > > > > > es/routin
> >
> > g
> > >
> > > > > > >
> >
> > /nodo
> > > > > > >
> > > > > > >
> > >
> > > gsplash_0.9_beta9.9.9-2-20150718_043129_ar71xx.ipk.
> > > > > > > Installing nodogsplash (0.9_beta9.9.9-2-20150718_043129)
> > > > > > > to root... Collected errors: * satisfy_dependencies_for:
> > > > > > > Cannot satisfy the following dependencies for
> > > > > > > nodogsplash:
> > > > > > > * iptables-mod-ipopt * * opkg_install_cmd: Cannot install
> > > > > > > package nodogsplash. root a LiMe-682c94:~#
> > > > > > > root a LiMe-682c94:~# opkg install iptables-mod-ipopt
> > > > > > > Unknown
> > > > > > > package 'iptables-mod-ipopt'. Collected errors: *
> > > > > > > opkg_install_cmd: Cannot install package
> > > > > > > iptables-mod-ipopt. root a LiMe-682c94:~# root a LiMe-682c94:
> > > > > > > ~#
> > > > > > > opkg install
> > > > > > > https://downloads.openwrt.org/chaos_calmer/15.0
> > > > > > > 5.1/ar71xx/generic/packages/base/iptables-mod-
> > > > > > > ipopt_1.4.21-1_ar71x
> >
> > x
> > >
> > > > > > >
> >
> > .ipk
> > > > > > >
> > > > > > >
> > >
> > > Collected errors:
> > > > > > > * wfopen:
> > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx
> > > > > > > /generic/
> >
> > p
> > >
> > > > > > >
> >
> > ackag
> > > > > > >
> > > > > > >
> > >
> > > es/base/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk:
> > > > > > > No such file or directory. * pkg_init_from_file: Failed
> > > > > > > to
> > > > > > > extract control file from
> > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx
> > > > > > > /generic/
> >
> > p
> > >
> > > > > > >
> >
> > ackag
> > > > > > >
> > > > > > >
> > >
> > > es/base/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk.
> > > > > > > root a LiMe-682c94:~# root a LiMe-682c94:~# opkg install
> > > > > > > /tmp/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk Installing
> > > > > > > iptables-mod-ipopt (1.4.21-1) to root... Collected
> > > > > > > errors:
> > > > > > > * satisfy_dependencies_for: Cannot satisfy the following
> > > > > > > dependencies for iptables-mod-ipopt: * kmod-ipt-ipopt
> > > > > > > *
> > > > > > > * opkg_install_cmd: Cannot install package
> > > > > > > iptables-mod-ipopt. root a LiMe-682c94:~# root a LiMe-682c94:
> > > > > > > ~#
> > > > > > > root a LiMe-682c94:~# opkg install
> > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71
> > > > > > > xx/generic/packages/base/kmod-ipt-ipopt_3.18.23-
> > > > > > > 1_ar71xx.ipk
> > > > > > > Collected errors: * wfopen:
> > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx
> > > > > > > /generic/
> >
> > p
> > >
> > > > > > >
> >
> > ackag
> > > > > > >
> > > > > > >
> > >
> > > es/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk:
> > > > > > > No such file or directory. * pkg_init_from_file: Failed
> > > > > > > to
> > > > > > > extract control file from
> > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx
> > > > > > > /generic/
> >
> > p
> > >
> > > > > > >
> >
> > ackag
> > > > > > >
> > > > > > >
> > >
> > > es/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk.
> > > > > > > root a LiMe-682c94:~# root a LiMe-682c94:~#
> > > > > > > root a LiMe-682c94:~# opkg install
> > > > > > > /tmp/kmod-ipt-ipopt_3.18.23-1_ar71xx.ip k Installing
> > > > > > > kmod-ipt-ipopt (3.18.23-1) to root... Collected errors: *
> > > > > > > satisfy_dependencies_for: Cannot satisfy the following
> > > > > > > dependencies for kmod-ipt-ipopt: * kernel (=
> > > > > > > 3.18.23-1-b2f200610f46d20ef52d269421369d0c) * *
> > > > > > > opkg_install_cmd: Cannot install package kmod-ipt-ipopt.
> > > > > > > root a LiMe-682c94:~# root a LiMe-682c94:~# cat /etc/banner
> > > > > > > _______ ________ __ |
> > > > > > > > .-----.-----.-----.| | | |.----.| |_
> > > > > > > > | - || _ |
> > > > > > >
> > > > > > > -__| || | | || _|| _| |_______||
> > > > > > > __|_____|__|__||________||__| |____| |__| W I R E L E S
> > > > > > > S
> > > > > > > F R E E D O M
> > > > > > > -----------------------------------------------------
> > > > > > > CHAOS CALMER (Chaos Calmer, r49403)
> > > > > > > ----------------------------------------------------- * 1
> > > > > > > 1/2 oz Gin Shake with a glassful * 1/4 oz
> > > > > > > Triple
> > > > > > > Sec of broken ice and pour * 3/4 oz Lime Juice
> > > > > > > unstrained into a goblet. * 1 1/2 oz Orange Juice * 1
> > > > > > > tsp.
> > > > > > > Grenadine Syrup
> > > > > > > ----------------------------------------------------- ___
> > > > > > > __ __ _______ __ | |_|__|
> > > > > > > > --.----.-----.| | |-----.-----| |--. | | | _
> > > > > > > > _| -__|| | -__|__ --| | |_____|__|_____|__|
> > > > > > > > _____||__|_|__|_____|_____|__|__|
> > > > > > >
> > > > > > > ------------------------------------------------------
> > > > > > > LiMe 16.07 CommunityChaos (16.07 rev.5fbd38f
> > > > > > > 20160913_2151)
> > > > > > > ------------------------------------------------------
> > > > > > > http://libremesh.org
> > > > > > > ------------------------------------------------------
> > > > > > > root a LiMe-682c94:~#
> > > > > > > _______________________________________________ lime-
> > > > > > > users
> > > > > > > mailing list lime-users a lists.libremesh.org
> > > > > > > https://lists.libremesh.org/mailman/listinfo/lime-users
> > > > > > >
> > > > > >
> > > > > > -- ./p4u
> > > > > >
> > > > > >
> > > > > > _______________________________________________ lime-users
> > > > > > mailing list lime-users a lists.libremesh.org
> > > > > > https://lists.libremesh.org/mailman/listinfo/lime-users
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
> > > > _______________________________________________ lime-users
> > > > mailing list lime-users a lists.libremesh.org
> > > > https://lists.libremesh.org/mailman/listinfo/lime-users
> > >
> > >
> > >
> > >
> > > _______________________________________________ lime-users
> > > mailing
> > > list lime-users a lists.libremesh.org
> > > https://lists.libremesh.org/mailman/listinfo/lime-users
> > >
> >
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v2.0.22 (GNU/Linux)
> >
> > iQIcBAEBAgAGBQJZIzl5AAoJEF2FWO6p8n2eSuwQANWdSANUGQSxy8K8jA2pk8O5
> > ICjSH99id2rvAZHYVumba9HYqL+lW3AguAJnqs8cHrS7ZxTZuWmT36PG3yrvm76k
> > 5FCaERMHOGz7U1swSADWt5DzIDrk2sHoyHEpQWNZKQC4rfTr57z1C/5Yh/LrlQP7
> > ydmIXVz3lob/E1IZ3loKwJXVKasn/iNu2bRV2qjxfaH8bX1y7DZsTvyGSg7E6eWe
> > zYm1cRyjfvGgBe2NOGWT2Rv7Jigzr2o5YSfR21VFX3yFmiWzfZZhRCsk9FHmmK1T
> > dWX3dNxYFDNfOWZZxK48Dwsg1iTrCWWfJtGoKdDBvjfAnQR0MiXrH+pjrVdFJumM
> > bUell7QQkt/V3c6mXnNjIXSU45dZ6tEfjUaCrxKzlm4qE177Umt5tSng6fP6qs4C
> > 0iC685EEshJLfPO0AYsAz7g2hbxlQTuvZsNMKBCcO4AYQ9usyZj4bbebEVU5TrK/
> > bRDHKXmBEKlKNIUTrkIpev5tMX6ZrQj5O3UP4dj4hRodG5E2pq3/my/td87stHuW
> > fJHnOpz3l6YbD5rONnPLJhn8h/QIucvhHHPirtuLKAkd9eKkcgAYB9JbuvldSByT
> > DRML6noXYG/tPc86z4wRTG0p1uYnMOBXHieaZVHvQKkaISmq52uTimlK+guwEwP+
> > 8oCS5WoQa345fpDlZgiL
> > =Mzsc
> > -----END PGP SIGNATURE-----
> > _______________________________________________
> > lime-users mailing list
> > lime-users a lists.libremesh.org
> > https://lists.libremesh.org/mailman/listinfo/lime-users
>
>
>
_______________________________________________
lime-users mailing list
lime-users a lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
-------------- parte successiva --------------
Un allegato non testuale รจ stato rimosso....
Nome: signature.asc
Tipo: application/pgp-signature
Dimensione: 817 bytes
Descrizione: non disponibile
URL: <http://ml.ninux.org/pipermail/bologna/attachments/20170531/887be52f/attachment-0001.sig>
Maggiori informazioni sulla lista
Bologna