[ninux-Firenze] Fwd: Non passate da AirOS 5.6.X a OpenWRT!!

Emanuele Ricciardi emanuele.ricciardi at gmail.com
Thu Dec 31 19:17:33 CET 2015


Massima solidarietà!
Il 31/Dic/2015 16:30, "Ilario Gelmetti" <iochesonome at gmail.com> ha scritto:

> Ieri ho fatto un casino, fate attenzione quando passate una antenna da
> AirOS a OpenWRT! Qui sotto i dettagli.
>
>
> -------- Forwarded Message --------
> Subject: Non passate da AirOS 5.6.X a OpenWRT!!
> Date: Wed, 30 Dec 2015 20:08:33 +0100
> From: Ilario Gelmetti <iochesonome at gmail.com>
> To: wireless ninux ML <wireless at ml.ninux.org>
>
> Oggi ho aggiornato a AirOS 5.6.3 svariati devices Ubiquiti prima di
> passarli a OpenWRT/Libre-Mesh.
> Ed è stato un errore, perché quegli infami della Ubiquiti [1] nei
> firmware 5.6.X (rilasciati da luglio in poi) hanno leggermente spostato
> le partizioni sulla memoria senza apparente motivo [2].
> Al primo accesso all'antenna dopo il flashing tutto sembrava
> funzionante, s'è connessa in mesh agli altri nodi etc, ma dopo la
> modifica di qualche file (ad esempio impostando la password di root) e
> un riavvio, questi file non sono stati salvati.
> In dmesg si trovano messaggi tipo:
>
> jffs2: Newly-erased block contained word 0x19852003 at offset 0x00320000
>
> A posteriori ho trovato questo avviso [3]:
>
> "Special Firmware Note: AirOS XM.v5.5.X images used U-Boot 1.1.4.2-s594
> (Dec 5 2012 - 15:23:07). The OpenWRT image can be successfully flashed
> onto these versions of firmware. However, in July 2015 Ubiquiti released
> a new version of firmware XM.v5.6.X. With this firmware a new U-Boot
> version was released, U-Boot 1.1.4.2-s956 (Jun 10 2015 - 10:54:50). The
> newer U-Boot version changes the memory size and starting address for
> rootfs, cfg, and EEPROM. LOADING AN OPENWRT IMAGE ON A U-Boot
> 1.1.4.2-s956 WILL CAUSE THE DEVICE TO BE BRICKED!!!
>
> If the device has XM.v5.6.X, an older version of XM firmware can be
> loaded from the AirOS webgui (for example XM.v5.5.10) and U-Boot will be
> overwritten with the older version. OpenWRT can then be loaded onto the
> device successfully."
>
> Per ora online non ho trovato una soluzione vera e completa, nei
> prossimi giorni farò delle prove.
> Ciao,
> Ilario
>
> PS urge abbandonare questi produttori di hardware infami per provare
> alternative più open e comunitarie, che non ci tendano simili trappole.
>
> [1] http://libertybsd.net/ubiquiti/
> [2] http://www.aredn.org/comment/849#comment-849
> [3] https://wiki.openwrt.org/toh/ubiquiti/airmaxm
>
> --
> Ilario Gelmetti
> iochesonome at gmail.com
> igelmetti at iciq.es
> ilario.gelmetti at estudiants.urv.cat
>
>
>
>
>
>
> _______________________________________________
> Firenze mailing list
> Firenze at ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/firenze
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ml.ninux.org/pipermail/firenze/attachments/20151231/65d051a8/attachment-0001.html>


More information about the Firenze mailing list