[Ninux-Wireless] NanoStation M5 e ath9k: domande

[ZioPRoTo (Saverio Proto)]

> iw list
> dovresti avere la lista di canali

Ok, ora devo capire come cambiare il country code:

Frequencies:
			* 5180 MHz [36] (17.0 dBm)
			* 5200 MHz [40] (17.0 dBm)
			* 5220 MHz [44] (17.0 dBm)
			* 5240 MHz [48] (17.0 dBm)
			* 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5600 MHz [120] (disabled)
			* 5620 MHz [124] (disabled)
			* 5640 MHz [128] (disabled)
			* 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection)
			* 5745 MHz [149] (30.0 dBm)
			* 5765 MHz [153] (30.0 dBm)
			* 5785 MHz [157] (30.0 dBm)
			* 5805 MHz [161] (30.0 dBm)
			* 5825 MHz [165] (30.0 dBm)


> iw dev wlan0 set channel 42
> dovresti poter settare il canale

questo funziona con l'accortezza di fare prima ifconfig down perché se
l'interfaccia non è giù non ti fa cambiare canale.

Saverio