[Ninux-Wireless] AP cisco

[Gioacchino]

ho costruito alimentatore 48v e cavo seriale <-> rj45 a mano e da quello che 
dice la console tutto ok solo che mi chiede la password se provo ad usare 
enable che a quanto ho capito serve per attivare il wireless e/o l'interfaccia 
web ( ho trovato su un sito che ha un bug di sicurezza... ) e se non ho capito 
male per avere la password bisogna registrarsi sul sito della cisco...
se sapete come ottenere la password o cosa fare per accedere fatemi sapere...


▒▒Xmodem file system is available.
flashfs[0]: 3 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 1870336
flashfs[0]: Bytes available: 14128640
flashfs[0]: flashfs fsck took 26 seconds.
Base ethernet MAC Address: 00:26:0b:62:73:bc
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-
mx"...#########################################################################################################################################################################

File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, 
entry point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, 
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440

Initializing flashfs...

flashfs[1]: 3 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 1870336
flashfs[1]: Bytes available: 14128640
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision B0) with 
24566K/8192K bytes of memory.
Processor board ID FCZ1336Q1DA
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:26:0B:62:73:BC
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC133438X8
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1336Q1DA
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9



Press RETURN to get started!


*Mar  1 00:00:06.295: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power 
source
*Mar  1 00:00:06.305: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, 
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
*Mar  1 00:00:07.262: %LINK-3-UPDOWN: Interface FastEthernet0, changed state 
to up
*Mar  1 00:00:08.262: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
FastEthernet0, changed state to up
*Mar  1 00:00:25.312: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar  1 00:00:33.451: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned 
DHCP address 192.168.0.93, mask 255.255.255.0, hostname AP0026.0b62.73bc