[Ninux-Wireless] Tinc

[Filippo Sallemi]

Ciao non so cosa ho fatto ma adesso la vpn funzia.

Due domande:
1. Meglio tcp o udp (openvpn usa udp)
2. E' possibile avere un sistema dhcp tipo openvpn che assegni ai
client vpn un'indirizzo?

Ciao

2011/9/1 Filippo Sallemi <tonyputi a gmail.com>:
> Allora a questo punto facendo ping da 192.168.100.2 a 192.168.100.1
> ottengo questo:
>
> root a nano:/etc/tinc/meshboard# ping 192.168.100.1
> PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data.
> From 192.168.100.1 icmp_seq=1 Destination Net Unknown
> From 192.168.100.1 icmp_seq=2 Destination Net Unknown
> From 192.168.100.1 icmp_seq=3 Destination Net Unknown
> From 192.168.100.1 icmp_seq=4 Destination Net Unknown
> From 192.168.100.1 icmp_seq=5 Destination Net Unknown
> From 192.168.100.1 icmp_seq=6 Destination Net Unknown
> From 192.168.100.1 icmp_seq=7 Destination Net Unknown
> From 192.168.100.1 icmp_seq=8 Destination Net Unknown
> From 192.168.100.1 icmp_seq=9 Destination Net Unknown
> From 192.168.100.1 icmp_seq=10 Destination Net Unknown
>
> root a nano:/etc/tinc/meshboard# route -n
> Tabella di routing IP del kernel
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> 192.168.100.0   0.0.0.0         255.255.255.0   U     0      0
> 0 meshboard
> 169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 wlan0
> 10.0.0.0        0.0.0.0         255.0.0.0       U     1      0        0 eth0
> 0.0.0.0         10.112.248.1    0.0.0.0         UG    0      0        0 eth0
>
> Sul server invece :
> root a jigen:/etc/tinc/meshboard/hosts# ping 192.168.100.2
> PING 192.168.100.2 (192.168.100.2) 56(84) bytes of data.
> ^C
> --- 192.168.100.2 ping statistics ---
> 4 packets transmitted, 0 received, 100% packet loss, time 3023ms
>
> root a jigen:/etc/tinc/meshboard/hosts# route -n
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> 192.168.100.0   0.0.0.0         255.255.255.0   U     0      0
> 0 meshboard
> 95.142.172.0    0.0.0.0         255.255.252.0   U     0      0        0 eth0
> 0.0.0.0         95.142.175.254  0.0.0.0         UG    0      0        0 eth0
>
> ???????????????????
>
> Il 01 settembre 2011 17:42, ZioPRoTo (Saverio Proto)
> <zioproto a gmail.com> ha scritto:
>>> ConntectTo = server
>>
>> questo è sbagliato, "ConnectTo"
>>
>> era questo il problema ?
>>
>> Saverio
>> _______________________________________________
>> Wireless mailing list
>> Wireless a ml.ninux.org
>> http://ml.ninux.org/mailman/listinfo/wireless
>>
>
>
>
> --
> Filippo Sallemi
>



-- 
Filippo Sallemi