[Ninux-Wireless] Configurazione radio wdr3600 su openwrt a 300 mbps
Saverio Proto
zioproto a gmail.com
Gio 10 Ott 2013 19:34:31 CEST
Ti serve preamble short per andare veloce. Strano long.
Cmq nella cartella:
/sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/stations/<mac address client>
trovi le info per fare debug.
Saverio
2013/10/10 Alessandro Gnagni <enterprise.nx a gmail.com>:
> root a HAL-O:~# iw wlan1 station dump
> Station 40:f3:08:1e:1e:f7 (on wlan1)
> inactive time: 18350 ms
> rx bytes: 826490
> rx packets: 10166
> tx bytes: 1070375
> tx packets: 3443
> tx retries: 25
> tx failed: 0
> signal: -44 [-49, -46] dBm
> signal avg: -44 [-51, -46] dBm
> tx bitrate: 150.0 MBit/s MCS 7 40MHz short GI
> rx bitrate: 6.0 MBit/s
> authorized: yes
> authenticated: yes
> preamble: long
> WMM/WME: yes
> MFP: no
> TDLS peer: no
> root a HAL-O:~#
>
>
>
> Il 10/10/2013 09.25, Saverio Proto ha scritto:
>> che vedi sull'AP se fai
>>
>> iw wlan0 station dump
>>
>> ??
>>
>> grazie
>>
>> Saverio
>>
>> Il 10 ottobre 2013 08:39, Alessandro Gnagni <enterprise.nx a gmail.com>
>> ha scritto:
>>> Nessun disturbo su quel canale. Dopo provo a cambiarlo.
>>>
>>> Il 10/ott/2013 02:01 "ax89" <ax89 a autoproduzioni.net> ha scritto:
>>>
>>>> Il 09/10/2013 16:48, Alessandro Gnagni ha scritto:
>>>>> ho questa configurazione sul mio wdr3600 ma non riesco a far andare a
>>>>> 300 mbps i client sul 5 ghz, max 150.
>>>>> Dove sbaglio?
>>>>>
>>>>> config wifi-device radio0
>>>>> option type mac80211
>>>>> option channel 3
>>>>> option hwmode 11ng
>>>>> option macaddr 64:70:02:b5:de:f1
>>>>> option htmode HT40+
>>>>> list ht_capab LDPC
>>>>> list ht_capab SHORT-GI-40
>>>>> list ht_capab TX-STBC
>>>>> list ht_capab RX-STBC1
>>>>> list ht_capab DSSS_CCK-40
>>>>> option diversity 1
>>>>> option noscan 1
>>>>> option country IT
>>>>>
>>>>> config wifi-iface
>>>>> option device radio0
>>>>> option network lan
>>>>> option mode ap
>>>>> option ssid Hal.net-2.4Ghz
>>>>> option encryption psk2
>>>>> option key '*******'
>>>>>
>>>>> config wifi-device radio1
>>>>> option type mac80211
>>>>> option channel 36
>>>>> option hwmode 11na
>>>>> option macaddr 64:70:02:b5:de:f2
>>>>> option htmode HT40+
>>>>> list ht_capab SHORT-GI-40
>>>>> list ht_capab TX-STBC
>>>>> list ht_capab RX-STBC1
>>>>> list ht_capab DSSS_CCK-40
>>>>> option diversity 1
>>>>> option noscan 1
>>>>> option country IT
>>>>>
>>>>> config wifi-iface
>>>>> option device radio1
>>>>> option network lan
>>>>> option mode ap
>>>>> option ssid Hal.net-5.0Ghz
>>>>> option encryption psk2
>>>>> option key '******'
>>>>> _______________________________________________
>>>>> Wireless mailing list
>>>>> Wireless a ml.ninux.org
>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>
>>>>>
>>>> Dando per scontato che il device che stai usando per connetterti
>>>> supporti MIMO 2x2 e abbia due antenne (una per l'RX-diversity),
>>>> probabilmente dipende dal fatto che stai in un canale overlapping o ci
>>>> sono dei disturbi su quel canale. Prova a cambiare canale.
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless a ml.ninux.org
>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>
>>>
>>> _______________________________________________
>>> Wireless mailing list
>>> Wireless a ml.ninux.org
>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless a ml.ninux.org
>> http://ml.ninux.org/mailman/listinfo/wireless
>>
>
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless
Maggiori informazioni sulla lista
Wireless