[Ninux-Wireless] informazioni su M5 24:a4

Dom 14 Set 2014 22:05:26 CEST

Buonasera ninux,
mi ripresento visto che non scrivo mai sulla mailing list.
Mi chiamo Carlo  e ho il nodo foglia CARBON. Mi piacerebbe venire al fusolab ma il mio lavoro non me lo permette, quindi lancio un sasso nella mailing list...

Ho acquistato ad aprile un nanostation M5 con mac address 24:a4 e non sapendo dell’incompatibilità’  ho seguito  le istruzioni sul sito e ho caricato Sburratone4-XM.v5.3.3.sdk.9634.111221.2238 
non sono riuscito a connettermi e cercando nei vari link ho trovato una versione più recente la Sburratone-5.5.2-RC5-XM.v5.5.2.sdk.14464.130408.1932
l’ho installata e grazie all’aiuto di Fish sono riuscito a entrare in ninux 

pero’ ho un problema:

non riesco ad abilitare il dhcp

scavando nei log ho notato che ha la data di aprile 

Version: v5.5.2.sdk
Uptime: 00:24:16
Date: 2013-04-08 20:56:11
Build Number:	14464

ho usato sia il server ntp di ninux sia il 193.204.114.233 e non aggancia la data
 questa è la prima parte del log

Apr 08 20:32:19 route: add host ip , dev ath0 failed [error: 1]
Apr 08 20:32:19 route: add default gw failed [error: 1]
Apr 08 20:32:19 system: Start
Apr  8 20:32:20 syslogd started: BusyBox v1.11.2
Apr  8 20:32:20 dnsmasq[1053]: started, version 2.47 cachesize 150
Apr  8 20:32:20 dnsmasq[1053]: compile time options: IPv6 GNU-getopt no-DBus no-I18N TFTP
Apr  8 20:32:20 dnsmasq[1053]: DHCP, IP range 10.168.1.2 -- 10.168.1.254, lease time 10m
Apr  8 20:32:20 dnsmasq[1053]: reading /etc/resolv.conf
Apr  8 20:32:20 dnsmasq[1053]: using nameserver 8.8.8.8#53
Apr  8 20:32:20 dnsmasq[1053]: using nameserver 10.11.12.13#53
Apr  8 20:32:20 dnsmasq[1053]: read /etc/hosts - 1 addresses
Apr  8 20:32:20 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1052) exited. Scheduling for restart.
Apr  8 20:32:20 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1058) exited. Scheduling for restart.
Apr  8 20:32:20 init: starting pid 1067, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:20 init: starting pid 1066, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:20 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:21 dropbear[1056]: Not backgrounding
Apr  8 20:32:21 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1066) exited. Scheduling for restart.
Apr  8 20:32:21 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1067) exited. Scheduling for restart.
Apr  8 20:32:21 init: starting pid 1068, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:21 init: starting pid 1069, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:21 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:22 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1068) exited. Scheduling for restart.
Apr  8 20:32:22 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1069) exited. Scheduling for restart.
Apr  8 20:32:22 init: starting pid 1071, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:22 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:22 init: starting pid 1070, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:23 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1070) exited. Scheduling for restart.
Apr  8 20:32:23 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1071) exited. Scheduling for restart.
Apr  8 20:32:23 init: starting pid 1073, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:23 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:23 init: starting pid 1072, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:24 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1072) exited. Scheduling for restart.
Apr  8 20:32:24 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1073) exited. Scheduling for restart.
Apr  8 20:32:24 init: starting pid 1075, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:24 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:24 init: starting pid 1074, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:25 ac-agent: Pinging 'http://10.168.177.189:9081/AC2/report'...
Apr  8 20:32:25 ac-agent: done.
Apr  8 20:32:25 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1074) exited. Scheduling for restart.
Apr  8 20:32:25 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1075) exited. Scheduling for restart.
Apr  8 20:32:25 init: starting pid 1087, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:25 init: starting pid 1088, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:25 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:26 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1087) exited. Scheduling for restart.
Apr  8 20:32:26 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1088) exited. Scheduling for restart.
Apr  8 20:32:26 init: starting pid 1089, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:26 init: starting pid 1090, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:26 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:27 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1089) exited. Scheduling for restart.
Apr  8 20:32:27 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1090) exited. Scheduling for restart.
Apr  8 20:32:27 init: starting pid 1092, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:27 init: Cannot run '/bin/dhcp-fwd': No such file or directory
Apr  8 20:32:27 init: starting pid 1091, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:28 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1091) exited. Scheduling for restart.
Apr  8 20:32:28 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1092) exited. Scheduling for restart.
Apr  8 20:32:28 init: starting pid 1094, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
Apr  8 20:32:28 init: starting pid 1093, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
Apr  8 20:32:28 init: Cannot run '/bin/dhcp-fwd': No such file or directory
poi si ripete ad oltranza.

nella pagina main monitor trovo anche una lan1 che non trovo nella sezione network
LAN0	24:A4:3C:83:42:54	1500	10.168.0.1	98.6K	0	304K	0
LAN1	26:A4:3C:83:42:54	1500	0.0.0.0	0.00	0	0.00	0
WLAN0	24:A4:3C:82:42:54	1500	172.16.168.1	78.8K	0	720	0

questo è invece il file di backup

aaa.1.status=disabled
wpasupplicant.status=disabled
wpasupplicant.device.1.status=disabled
wireless.status=enabled
wireless.1.wmmlevel=
wireless.1.wmm=enabled
wireless.1.wds.status=enabled
wireless.1.status=enabled
wireless.1.ssid=ninux.org
wireless.1.signal_led_status=enabled
wireless.1.signal_led4=4
wireless.1.signal_led3=3
wireless.1.signal_led2=2
wireless.1.signal_led1=1
wireless.1.sens=0
wireless.1.security.type=none
wireless.1.scan_list.status=disabled
wireless.1.scan_list.channels=
wireless.1.macclone=disabled
wireless.1.l2_isolation=disabled
wireless.1.hide_ssid=disabled
wireless.1.frameburst=0
wireless.1.fastframes=0
wireless.1.devname=ath0
wireless.1.compression=0
wireless.1.authmode=1
wireless.1.ap=00:15:6D:8E:46:F2
wireless.1.addmtikie=enabled
vlan.status=disabled
users.status=enabled
users.2.status=disabled
users.1.status=enabled
users.1.password=xxxxxxxxxxxxx
users.1.name=root
upnpd.status=disabled
upnpd.listening.1.status=disabled
upnpd.listening.1.netmask=255.255.255.0
upnpd.listening.1.ip=10.168.0.1
upnpd.devname=ath0
update.check.status=disabled
tshaper.status=disabled
telnetd.status=disabled
system.timezone=GMT-1
system.longitude=
system.latitude=
system.eirp.status=enabled
system.date.timestamp=091400002014
system.date.status=disabled
system.cfg.version=65540
system.button.reset=enabled
syslog.status=enabled
syslog.remote.status=
sshd.status=enabled
sshd.port=22
sshd.auth.passwd=enabled
snmp.status=enabled
snmp.location=CBiancoAgo
snmp.contact=Carlo
snmp.community=public
route.status=enabled
route.1.status=enabled
route.1.netmask=0
route.1.ip=0.0.0.0
route.1.gateway=
route.1.devname=ath0
route.1.comment=
resolv.status=disabled
resolv.nameserver.status=enabled
resolv.nameserver.2.status=enabled
resolv.nameserver.2.ip=8.8.8.8
resolv.nameserver.1.status=enabled
resolv.nameserver.1.ip=10.11.12.13
resolv.host.1.status=enabled
resolv.host.1.name=M5CBiancoAgo
radio.status=enabled
radio.countrycode=860
radio.1.txpower=27
radio.1.thresh62g=
radio.1.thresh62b=
radio.1.thresh62a=
radio.1.subsystemid=0xe805
radio.1.status=enabled
radio.1.rts=off
radio.1.reg_obey=disabled
radio.1.rate.mcs=12
radio.1.rate.auto=enabled
radio.1.pollingpri=2
radio.1.pollingnoack=
radio.1.polling=disabled
radio.1.obey=disabled
radio.1.mode=managed
radio.1.mcastrate=15
radio.1.low_txpower_mode=disabled
radio.1.ieee_mode=11naht40
radio.1.forbiasauto=0
radio.1.dfs.status=disabled
radio.1.devname=ath0
radio.1.cwm.mode=1
radio.1.cwm.enable=0
radio.1.countrycode=860
radio.1.clksel=1
radio.1.chanshift=0
radio.1.chanbw=0
radio.1.antenna.id=4
radio.1.ampdu.status=enabled
radio.1.ampdu.frames=32
radio.1.ampdu.bytes=50000
radio.1.airsync.status=disabled
radio.1.airsync.slot.up=
radio.1.airsync.slot.override=disabled
radio.1.airsync.slot.down=
radio.1.airsync.port=
radio.1.airsync.mode=
radio.1.airsync.ip=
radio.1.acktimeout=49
radio.1.ackdistance=4200
radio.1.ack.auto=enabled
pwdog.status=disabled
ppp.status=disabled
ntpclient.status=enabled
ntpclient.1.status=enabled
ntpclient.1.server=176.62.53.30
netmode=router
netconf.status=enabled
netconf.4.up=enabled
netconf.4.status=disabled
netconf.4.role=mlan
netconf.4.mtu=1500
netconf.4.hwaddr.status=disabled
netconf.4.hwaddr.mac=
netconf.4.devname=ath0
netconf.4.autoip.status=disabled
netconf.3.up=enabled
netconf.3.status=enabled
netconf.3.role=
netconf.3.promisc=enabled
netconf.3.netmask=255.255.255.0
netconf.3.mtu=1500
netconf.3.ip=0.0.0.0
netconf.3.hwaddr.status=disabled
netconf.3.hwaddr.mac=
netconf.3.devname=eth1
netconf.3.autoip.status=disabled
netconf.2.up=enabled
netconf.2.status=enabled
netconf.2.role=lan
netconf.2.promisc=enabled
netconf.2.netmask=255.255.255.0
netconf.2.mtu=1500
netconf.2.ip=10.168.0.1
netconf.2.hwaddr.status=disabled
netconf.2.hwaddr.mac=
netconf.2.devname=eth0
netconf.2.autoip.status=disabled
netconf.1.up=enabled
netconf.1.status=enabled
netconf.1.role=wan
netconf.1.promisc=enabled
netconf.1.netmask=255.255.0.0
netconf.1.mtu=1500
netconf.1.ip=172.16.168.1
netconf.1.hwaddr.status=disabled
netconf.1.hwaddr.mac=
netconf.1.devname=ath0
netconf.1.autoip.status=disabled
iptables.sys.upnpd.status=disabled
iptables.sys.upnpd.devname=ath0
iptables.sys.status=enabled
iptables.sys.portfw.status=disabled
iptables.sys.mgmt.status=disabled
iptables.sys.masq.status=disabled
iptables.sys.dmz.status=disabled
iptables.status=enabled
httpd.status=enabled
httpd.session.timeout=900
httpd.port=80
httpd.https.status=enabled
httpd.https.port=443
gui.language=en_US
gpio.status=dsdsfwfefnabled
gpio.1.value=disabled
gpio.1.status=enabled
gpio.1.line=8
gpio.1.direction=1
ebtables.sys.vlan.status=disabled
ebtables.sys.status=disabled
ebtables.status=disabled
dyndns.status=disabled
discovery.status=enabled
discovery.cdp.status=enabled
dhcprelay.status=enabled
dhcprelay.client.1.status=disabled
dhcprelay.client.1.devname=eth0
dhcpd.status=enabled
dhcpd.1.status=enabled
dhcpd.1.start=10.168.1.2
dhcpd.1.netmask=255.255.255.0
dhcpd.1.lease_time=600
dhcpd.1.end=10.168.1.254
dhcpd.1.dnsproxy=enabled
dhcpd.1.dns.2.status=disabled
dhcpd.1.dns.2.server=10.11.12.13
dhcpd.1.dns.1.status=disabled
dhcpd.1.dns.1.server=8.8.8.8
dhcpd.1.devname=eth0
dhcpc.status=enabled
dhcpc.1.status=disabled
dhcpc.1.fallback=192.168.10.1
dhcpc.1.devname=ath0
bridge.status=disabled
airview.tcp_port=18888
aaa.status=disabled

non mi torna la riga dhcpc.1.fallback=192.168.10.1 è normale?
nel frattempo che continuo a sbattere la testa c’è qualcuno che mi aiuta?
un saluto a tutti 
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20140914/a2dc8115/attachment-0001.html>