[Ninux-Wireless] informazioni su M5 24:a4

Lun 15 Set 2014 10:18:19 CEST

Sembrerebbe che alcune nano "imboccano" con il vecchio sburatone ,forse 
un bug?
con il MAC 24:A4 ho provato aggiornare  tre airgrid e due nano loco e 
non funzia accetta solo XW

Il 15/09/2014 10:09, federico la morgia ha scritto:
> Dopo che da interfaccia grafica hai fatto change devi usare questo 
> comando da ssh sull'antenna :
>
> cfgmtd -f /tmp/system.cfg -w
>
> e poi
>
> reboot
>
>
> P.S. : Ma ora i 24:A4 supportano il vecchio 5.5.2 ???? Io sapevo che 
> non lo supportavano per il cambio di hw fatto da ubiquiti.
>
> Fish illuminaci !
>
>
> ------------------------------------------------------------------------
> From: c.boninsegna a libero.it
> Date: Sun, 14 Sep 2014 22:05:26 +0200
> To: wireless a ml.ninux.org
> Subject: [Ninux-Wireless] informazioni su M5 24:a4
>
> Buonasera ninux,
> mi ripresento visto che non scrivo mai sulla mailing list.
> Mi chiamo Carlo  e ho il nodo foglia CARBON. Mi piacerebbe venire al 
> fusolab ma il mio lavoro non me lo permette, quindi lancio un sasso 
> nella mailing list...
>
> Ho acquistato ad aprile un nanostation M5 con mac address 24:a4 e non 
> sapendo dell’incompatibilità’  ho seguito  le istruzioni sul sito e ho 
> caricato Sburratone4-XM.v5.3.3.sdk.9634.111221.2238
> non sono riuscito a connettermi e cercando nei vari link ho trovato 
> una versione più recente 
> la Sburratone-5.5.2-RC5-XM.v5.5.2.sdk.14464.130408.1932
> l’ho installata e grazie all’aiuto di Fish sono riuscito a entrare in 
> ninux
>
> pero’ ho un problema:
>
> non riesco ad abilitare il dhcp
>
> scavando nei log ho notato che ha la data di aprile
>
> Version: v5.5.2.sdk
> Uptime: 00:24:16
> Date: 2013-04-08 20:56:11
> Build Number: 	14464
>
>
> ho usato sia il server ntp di ninux sia il 193.204.114.233 e non 
> aggancia la data
>  questa è la prima parte del log
>
> Apr 08 20:32:19 route: add host ip , dev ath0 failed [error: 1]
> Apr 08 20:32:19 route: add default gw failed [error: 1]
> Apr 08 20:32:19 system: Start
> Apr  8 20:32:20 syslogd started: BusyBox v1.11.2
> Apr  8 20:32:20 dnsmasq[1053]: started, version 2.47 cachesize 150
> Apr  8 20:32:20 dnsmasq[1053]: compile time options: IPv6 GNU-getopt no-DBus no-I18N TFTP
> Apr  8 20:32:20 dnsmasq[1053]: DHCP, IP range 10.168.1.2 -- 10.168.1.254, lease time 10m
> Apr  8 20:32:20 dnsmasq[1053]: reading /etc/resolv.conf
> Apr  8 20:32:20 dnsmasq[1053]: using nameserver 8.8.8.8#53
> Apr  8 20:32:20 dnsmasq[1053]: using nameserver 10.11.12.13#53
> Apr  8 20:32:20 dnsmasq[1053]: read /etc/hosts - 1 addresses
> Apr  8 20:32:20 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1052) exited. Scheduling for restart.
> Apr  8 20:32:20 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1058) exited. Scheduling for restart.
> Apr  8 20:32:20 init: starting pid 1067, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:20 init: starting pid 1066, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:20 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:21 dropbear[1056]: Not backgrounding
> Apr  8 20:32:21 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1066) exited. Scheduling for restart.
> Apr  8 20:32:21 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1067) exited. Scheduling for restart.
> Apr  8 20:32:21 init: starting pid 1068, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:21 init: starting pid 1069, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:21 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:22 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1068) exited. Scheduling for restart.
> Apr  8 20:32:22 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1069) exited. Scheduling for restart.
> Apr  8 20:32:22 init: starting pid 1071, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:22 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:22 init: starting pid 1070, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:23 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1070) exited. Scheduling for restart.
> Apr  8 20:32:23 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1071) exited. Scheduling for restart.
> Apr  8 20:32:23 init: starting pid 1073, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:23 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:23 init: starting pid 1072, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:24 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1072) exited. Scheduling for restart.
> Apr  8 20:32:24 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1073) exited. Scheduling for restart.
> Apr  8 20:32:24 init: starting pid 1075, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:24 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:24 init: starting pid 1074, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:25 ac-agent: Pinging 'http://10.168.177.189:9081/AC2/report'  <http://10.168.177.189:9081/AC2/report%27>...
> Apr  8 20:32:25 ac-agent: done.
> Apr  8 20:32:25 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1074) exited. Scheduling for restart.
> Apr  8 20:32:25 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1075) exited. Scheduling for restart.
> Apr  8 20:32:25 init: starting pid 1087, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:25 init: starting pid 1088, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:25 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:26 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1087) exited. Scheduling for restart.
> Apr  8 20:32:26 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1088) exited. Scheduling for restart.
> Apr  8 20:32:26 init: starting pid 1089, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:26 init: starting pid 1090, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:26 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:27 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1089) exited. Scheduling for restart.
> Apr  8 20:32:27 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1090) exited. Scheduling for restart.
> Apr  8 20:32:27 init: starting pid 1092, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:27 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> Apr  8 20:32:27 init: starting pid 1091, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:28 init: process '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30' (pid 1091) exited. Scheduling for restart.
> Apr  8 20:32:28 init: process '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf' (pid 1092) exited. Scheduling for restart.
> Apr  8 20:32:28 init: starting pid 1094, tty '/dev/null': '/bin/dhcp-fwd -n -c /etc/dhcp-fwd.conf'
> Apr  8 20:32:28 init: starting pid 1093, tty '/dev/null': '/sbin/ntpclient -n -s -c 0 -l -h 176.62.53.30'
> Apr  8 20:32:28 init: Cannot run '/bin/dhcp-fwd': No such file or directory
> poi si ripete ad oltranza.
>
> nella pagina main monitor trovo anche una lan1 che non trovo nella 
> sezione network
> LAN0 	24:A4:3C:83:42:54 	1500 	10.168.0.1 	98.6K 	0 	304K 	0
> LAN1 	26:A4:3C:83:42:54 	1500 	0.0.0.0 	0.00 	0 	0.00 	0
> WLAN0 	24:A4:3C:82:42:54 	1500 	172.16.168.1 	78.8K 	0 	720 	0
>
>
>
>
> questo è invece il file di backup
>
> aaa.1.status=disabled
> wpasupplicant.status=disabled
> wpasupplicant.device.1.status=disabled
> wireless.status=enabled
> wireless.1.wmmlevel=
> wireless.1.wmm=enabled
> wireless.1.wds.status=enabled
> wireless.1.status=enabled
> wireless.1.ssid=ninux.org <http://ninux.org>
> wireless.1.signal_led_status=enabled
> wireless.1.signal_led4=4
> wireless.1.signal_led3=3
> wireless.1.signal_led2=2
> wireless.1.signal_led1=1
> wireless.1.sens=0
> wireless.1.security.type=none
> wireless.1.scan_list.status=disabled
> wireless.1.scan_list.channels=
> wireless.1.macclone=disabled
> wireless.1.l2_isolation=disabled
> wireless.1.hide_ssid=disabled
> wireless.1.frameburst=0
> wireless.1.fastframes=0
> wireless.1.devname=ath0
> wireless.1.compression=0
> wireless.1.authmode=1
> wireless.1.ap=00:15:6D:8E:46:F2
> wireless.1.addmtikie=enabled
> vlan.status=disabled
> users.status=enabled
> users.2.status=disabled
> users.1.status=enabled
> users.1.password=xxxxxxxxxxxxx
> users.1.name=root
> upnpd.status=disabled
> upnpd.listening.1.status=disabled
> upnpd.listening.1.netmask=255.255.255.0
> upnpd.listening.1.ip=10.168.0.1
> upnpd.devname=ath0
> update.check.status=disabled
> tshaper.status=disabled
> telnetd.status=disabled
> system.timezone=GMT-1
> system.longitude=
> system.latitude=
> system.eirp.status=enabled
> system.date.timestamp=091400002014
> system.date.status=disabled
> system.cfg.version=65540
> system.button.reset=enabled
> syslog.status=enabled
> syslog.remote.status=
> sshd.status=enabled
> sshd.port=22
> sshd.auth.passwd=enabled
> snmp.status=enabled
> snmp.location=CBiancoAgo
> snmp.contact=Carlo
> snmp.community=public
> route.status=enabled
> route.1.status=enabled
> route.1.netmask=0
> route.1.ip=0.0.0.0
> route.1.gateway=
> route.1.devname=ath0
> route.1.comment=
> resolv.status=disabled
> resolv.nameserver.status=enabled
> resolv.nameserver.2.status=enabled
> resolv.nameserver.2.ip=8.8.8.8
> resolv.nameserver.1.status=enabled
> resolv.nameserver.1.ip=10.11.12.13
> resolv.host.1.status=enabled
> resolv.host.1.name=M5CBiancoAgo
> radio.status=enabled
> radio.countrycode=860
> radio.1.txpower=27
> radio.1.thresh62g=
> radio.1.thresh62b=
> radio.1.thresh62a=
> radio.1.subsystemid=0xe805
> radio.1.status=enabled
> radio.1.rts=off
> radio.1.reg_obey=disabled
> radio.1.rate.mcs=12
> radio.1.rate.auto=enabled
> radio.1.pollingpri=2
> radio.1.pollingnoack=
> radio.1.polling=disabled
> radio.1.obey=disabled
> radio.1.mode=managed
> radio.1.mcastrate=15
> radio.1.low_txpower_mode=disabled
> radio.1.ieee_mode=11naht40
> radio.1.forbiasauto=0
> radio.1.dfs.status=disabled
> radio.1.devname=ath0
> radio.1.cwm.mode=1
> radio.1.cwm.enable=0
> radio.1.countrycode=860
> radio.1.clksel=1
> radio.1.chanshift=0
> radio.1.chanbw=0
> radio.1.antenna.id=4
> radio.1.ampdu.status=enabled
> radio.1.ampdu.frames=32
> radio.1.ampdu.bytes=50000
> radio.1.airsync.status=disabled
> radio.1.airsync.slot.up=
> radio.1.airsync.slot.override=disabled
> radio.1.airsync.slot.down=
> radio.1.airsync.port=
> radio.1.airsync.mode=
> radio.1.airsync.ip=
> radio.1.acktimeout=49
> radio.1.ackdistance=4200
> radio.1.ack.auto=enabled
> pwdog.status=disabled
> ppp.status=disabled
> ntpclient.status=enabled
> ntpclient.1.status=enabled
> ntpclient.1.server=176.62.53.30
> netmode=router
> netconf.status=enabled
> netconf.4.up=enabled
> netconf.4.status=disabled
> netconf.4.role=mlan
> netconf.4.mtu=1500
> netconf.4.hwaddr.status=disabled
> netconf.4.hwaddr.mac=
> netconf.4.devname=ath0
> netconf.4.autoip.status=disabled
> netconf.3.up=enabled
> netconf.3.status=enabled
> netconf.3.role=
> netconf.3.promisc=enabled
> netconf.3.netmask=255.255.255.0
> netconf.3.mtu=1500
> netconf.3.ip=0.0.0.0
> netconf.3.hwaddr.status=disabled
> netconf.3.hwaddr.mac=
> netconf.3.devname=eth1
> netconf.3.autoip.status=disabled
> netconf.2.up=enabled
> netconf.2.status=enabled
> netconf.2.role=lan
> netconf.2.promisc=enabled
> netconf.2.netmask=255.255.255.0
> netconf.2.mtu=1500
> netconf.2.ip=10.168.0.1
> netconf.2.hwaddr.status=disabled
> netconf.2.hwaddr.mac=
> netconf.2.devname=eth0
> netconf.2.autoip.status=disabled
> netconf.1.up=enabled
> netconf.1.status=enabled
> netconf.1.role=wan
> netconf.1.promisc=enabled
> netconf.1.netmask=255.255.0.0
> netconf.1.mtu=1500
> netconf.1.ip=172.16.168.1
> netconf.1.hwaddr.status=disabled
> netconf.1.hwaddr.mac=
> netconf.1.devname=ath0
> netconf.1.autoip.status=disabled
> iptables.sys.upnpd.status=disabled
> iptables.sys.upnpd.devname=ath0
> iptables.sys.status=enabled
> iptables.sys.portfw.status=disabled
> iptables.sys.mgmt.status=disabled
> iptables.sys.masq.status=disabled
> iptables.sys.dmz.status=disabled
> iptables.status=enabled
> httpd.status=enabled
> httpd.session.timeout=900
> httpd.port=80
> httpd.https.status=enabled
> httpd.https.port=443
> gui.language=en_US
> gpio.status=dsdsfwfefnabled
> gpio.1.value=disabled
> gpio.1.status=enabled
> gpio.1.line=8
> gpio.1.direction=1
> ebtables.sys.vlan.status=disabled
> ebtables.sys.status=disabled
> ebtables.status=disabled
> dyndns.status=disabled
> discovery.status=enabled
> discovery.cdp.status=enabled
> dhcprelay.status=enabled
> dhcprelay.client.1.status=disabled
> dhcprelay.client.1.devname=eth0
> dhcpd.status=enabled
> dhcpd.1.status=enabled
> dhcpd.1.start=10.168.1.2
> dhcpd.1.netmask=255.255.255.0
> dhcpd.1.lease_time=600
> dhcpd.1.end=10.168.1.254
> dhcpd.1.dnsproxy=enabled
> dhcpd.1.dns.2.status=disabled
> dhcpd.1.dns.2.server=10.11.12.13
> dhcpd.1.dns.1.status=disabled
> dhcpd.1.dns.1.server=8.8.8.8
> dhcpd.1.devname=eth0
> dhcpc.status=enabled
> dhcpc.1.status=disabled
> dhcpc.1.fallback=192.168.10.1
> dhcpc.1.devname=ath0
> bridge.status=disabled
> airview.tcp_port=18888
> aaa.status=disabled
>
> non mi torna la riga dhcpc.1.fallback=192.168.10.1 è normale?
> nel frattempo che continuo a sbattere la testa c’è qualcuno che mi aiuta?
> un saluto a tutti
>
> _______________________________________________ Wireless mailing list 
> Wireless a ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
>
>
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless

-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20140915/a6e82701/attachment-0001.html>