[Ninux-Wireless] problema con 3 nodi collegati in modo AP+STA

Alessandro Gnagni alessandro a gnagni.it
Ven 1 Set 2017 13:48:49 CEST


perchè su porta 2 e 3 mandi traffico non taggato?

Il giorno 1 settembre 2017 11:06, Claudio <claud43 a gmail.com> ha scritto:

> ricercando in rete un problema simile o uguale è questo:
> https://community.ubnt.com/t5/airOS-Software-Configuration/Client-
> isolation-WDS/td-p/1168067
>
>
> Il giorno 1 settembre 2017 10:20, Claudio <claud43 a gmail.com> ha scritto:
>
>> questa è la configurazione del wdr3600. Ho escluso la conf. che non
>> interessa
>>
>> config interface 'lan'
>> option force_link '1'
>> option type 'bridge'
>> option proto 'static'
>> option netmask '255.255.255.0'
>> option _orig_ifname 'eth0.1 radio0.network1 radio1.network1'
>> option _orig_bridge 'true'
>> option ipaddr '10.94.90.1'
>> option dns '8.8.8.8 8.8.4.4'
>> option ifname 'eth0.10'
>>
>> config switch
>> option name 'switch0'
>> option reset '1'
>> option enable_vlan '1'
>> option mirror_source_port '0'
>> option mirror_monitor_port '0'
>>
>> config switch_vlan
>> option device 'switch0'
>> option vlan '2'
>> option ports '0t 1'
>> option vid '2'
>>
>> config switch_vlan
>> option device 'switch0'
>> option vlan '3'
>> option ports '0t 5t'
>> option vid '9'
>>
>> config switch_vlan
>> option device 'switch0'
>> option vlan '4'
>> option ports '0t 2 3 4t 5t'
>> option vid '10'
>>
>> config switch_vlan
>> option device 'switch0'
>> option vlan '5'
>> option ports '0t 4t'
>> option vid '8'
>>
>>
>> il Bridge dell'antenna è:
>>
>> LAN0.9+WLAN0
>>
>>
>>
>> Il giorno 1 settembre 2017 08:08, Alessandro Gnagni <alessandro a gnagni.it
>> > ha scritto:
>>
>>> Hai wds acceso su tutte e tre, due si collegano all'ap. Puoi farmi
>>> vedere la configurazione del bridge sull'ap?
>>>
>>> Il 31 ago 2017 14:07, "Claudio" <claud43 a gmail.com> ha scritto:
>>>
>>>> Da cosa può dipendere che le stazioni CPE + groundrouter continuano a
>>>> vedersi nella tabella di routing di olsr come collegati in mesh nonostante
>>>> abbia selezionato la configurazione delle antenne con wds + client
>>>> isolation ?
>>>>
>>>> stazione1
>>>> Neighbour IP Hostname Interface Local interface IP LQ NLQ ETX SNR
>>>> 172.31.90.91 ? nsm5ale 172.31.90.107 1.000 1.000 1.000 ?
>>>> 172.31.90.97 ? nsm5ale 172.31.90.107 1.000 1.000 1.000 ?
>>>>
>>>> Stazione2
>>>> Neighbour IP Hostname Interface Local interface IP LQ NLQ ETX SNR
>>>> 172.31.90.104 ? antenna2port3 172.31.90.98 1.000 1.000 1.000 ?
>>>> 172.31.90.91 ? antenna1port4 172.31.90.97 1.000 1.000 1.000 ?
>>>> 172.31.90.107 ? antenna1port4 172.31.90.97 1.000 1.000 1.000 ?
>>>>
>>>> AP
>>>> 172.31.90.95 ? antenna2port3 172.31.90.92 1.000 1.000 1.000 ?
>>>> 172.31.90.97 ? antenna1port4 172.31.90.91 1.000 1.000 1.000 ?
>>>> 10.94.0.1 ? ninuxvpn 10.94.0.2 1.000 1.000 1.000 ?
>>>> 172.31.90.107 ? antenna1port4 172.31.90.91 1.000 1.000 1.000 ?
>>>>
>>>> ho provato con diversi router sia con lede che openwrt ma in uno dei
>>>> due router ricevo sempre un evento:
>>>>
>>>> Ho provato con i router wr1043nd v2 e v4, wdr4300, xiaomi e wdr3600
>>>>
>>>> Thu Aug 31 12:16:52 2017 daemon.info olsrd[1637]: detected duplicate
>>>> packet with seqnr 0x66c0 from 172.31.90.91 on eth0.4 (292 Bytes)
>>>> Thu Aug 31 12:16:54 2017 daemon.info olsrd[1637]: detected duplicate
>>>> packet with seqnr 0x66c1 from 172.31.90.91 on eth0.4 (444 Bytes)
>>>>
>>>> Questo evento esce fuori solo quando sono 2 stazioni e un ap ancora non
>>>> ho mai provato con più stazioni.
>>>>
>>>> può essere causato da una versione di firmware delle nanostation m5?
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless a ml.ninux.org
>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>
>>>>
>>> _______________________________________________
>>> Wireless mailing list
>>> Wireless a ml.ninux.org
>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>
>>>
>>
>
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless
>
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20170901/05fcedb8/attachment-0001.html>


Maggiori informazioni sulla lista Wireless