[Ninux-Wireless] problema con 3 nodi collegati in modo AP+STA

Lun 4 Set 2017 00:54:17 CEST

ok, ma se non ci metto un ip come arrivo all'antenna per configurarla ?

Il giorno 4 settembre 2017 00:47, Matteo Pedani <matteo a pedani.it> ha
scritto:

> Ricordarti che quando metti in bridge vlan e radio al bridge non devi dare
> nessun IP.
>
>
> Il giorno 4 settembre 2017 00:23, Claudio <claud43 a gmail.com> ha scritto:
>
>> ok, il client isolation con la versione delle antenne a 5.5.10 mi
>> funziona solo senza WDS attivato.
>>
>> Qualcuno mi ha detto che a Roma usate anche un metodo del tipo creare
>> solo una vlan (per il trasporto wireless) e una vlan nel router per antenna
>> e la parte management lasciarla di default con la LAN0.
>>
>> forse per i router che non hanno bug a livello switch  ?
>>
>>
>>
>> Il giorno 4 settembre 2017 00:16, Alessandro Gnagni <alessandro a gnagni.it
>> > ha scritto:
>>
>>> In teoria no. Le vlan non dovrebbero uscire dalla wireless. Se l'antenna
>>> sta facendo correttamente client isolation potresti avere un loop di
>>> livello 2. in questo modo i pacchetti broadcast di una antenna sta entrano
>>> nell'ap, escono sulla lan, rientrano sulla lan e raggiungono la seconda sta.
>>>
>>> Il 03 set 2017 23:05, "Claudio" <claud43 a gmail.com> ha scritto:
>>>
>>>> ancora devo provare ad aggiornare airos all'ultima versione per capire
>>>> se è un problema delle antenne o delle vlan.
>>>>
>>>> ma per essere sicuri se con i nodi A <--> B <---> C
>>>>
>>>> router A uso la vlan 10, 9, 8
>>>> router B uso la vlan 7,4,3
>>>> router C uso la vlan 10,9
>>>>
>>>> collegati tipo: A(AP) B(STA) C(STA)
>>>>
>>>> in questo modo l'id delle vlan potrebbe creare problemi riguardo il
>>>> WDS+client isolation?
>>>>
>>>>
>>>>
>>>> Il giorno 3 settembre 2017 19:09, Alessandro Gnagni <
>>>> alessandro a gnagni.it> ha scritto:
>>>>
>>>>> Configurazione giusta, facciamo lo stesso a roma. Il problema che hai
>>>>> è causato da qualcosa che non sta gestendo correttamente le vlan, oppure il
>>>>> client isolation che non va. Però per mia esperienza o sono le vlan in
>>>>> overlapping oppure è il client isolation a non andare.
>>>>>
>>>>> Il 03 set 2017 18:57, "Claudio" <claud43 a gmail.com> ha scritto:
>>>>>
>>>>>> In tutti i nodi ci sono un router e 1 o 2 antenne e per ogni router
>>>>>> ci sono 1 VLAN di management e una o due VLAN per quanto sono le antenne
>>>>>> collegate. Per ogni antenna ci sono due VLAN corrispondenti a quelle del
>>>>>> router una di management e una wireless il bridge dell'antenna  è
>>>>>> wireless+vlan.
>>>>>>
>>>>>> Il 03 set 2017 18:51, "Alessandro Gnagni" <alessandro a gnagni.it> ha
>>>>>> scritto:
>>>>>>
>>>>>>> Ok, confusione sulle persone mia.
>>>>>>> Comunque lo switch che collega antenne a router è managed?
>>>>>>>
>>>>>>> Il 03 set 2017 17:50, "Claudio" <claud43 a gmail.com> ha scritto:
>>>>>>>
>>>>>>>> Scusate, io non sono Clauz ... Mi state scambiando per un'altra
>>>>>>>> persona
>>>>>>>>
>>>>>>>> I miei nodi sono quelli di Palermo e stiamo riscontrando questi
>>>>>>>> problemi attivando il wds e il client isolation in
>>>>>>>>
>>>>>>>> Appena posso mando la configurazione Delle antenne ma ho sempre
>>>>>>>> seguito la configurazione del groundrouter
>>>>>>>>
>>>>>>>> Il 03 set 2017 17:32, "Alessandro Gnagni" <alessandro a gnagni.it>
>>>>>>>> ha scritto:
>>>>>>>>
>>>>>>>>> Lo puoi portare giovedì con le antenne e proviamo?
>>>>>>>>>
>>>>>>>>> Il 01 set 2017 22:26, "Claudio" <claud43 a gmail.com> ha scritto:
>>>>>>>>>
>>>>>>>>>> Ho provato a cambiare il option vlan '?' mettendolo uguale al
>>>>>>>>>> vid ma non cambia nulla
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Il giorno 1 settembre 2017 19:47, Claudio <claud43 a gmail.com> ha
>>>>>>>>>> scritto:
>>>>>>>>>>
>>>>>>>>>>> ho sempre configurato le vlan da LUCI la situazione attuale da
>>>>>>>>>>> GUI è questa:
>>>>>>>>>>>
>>>>>>>>>>> vlan cpu port1 port2 port3 port4 port5 port6
>>>>>>>>>>> 2 tag untag off off off off off
>>>>>>>>>>> 8 tag off off off tag off off
>>>>>>>>>>> 9 tag off off off off tag off
>>>>>>>>>>> 10 tag off untag untag tag tag off
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> la vlan 2 è la porta wan
>>>>>>>>>>>
>>>>>>>>>>> le vlan 8 e 9 sono due antenne
>>>>>>>>>>>
>>>>>>>>>>> la vlan 10 è quella di gestione
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> non ho mai capito
>>>>>>>>>>>
>>>>>>>>>>> il vid associato alla id della vlan deve essere uguale??
>>>>>>>>>>>
>>>>>>>>>>> può essere questo il problema?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Il giorno 1 settembre 2017 13:49, Alessandro Gnagni <
>>>>>>>>>>> alessandro a gnagni.it> ha scritto:
>>>>>>>>>>>
>>>>>>>>>>>> mi sembra strano, abbiamo mezza roma configurata così e non è
>>>>>>>>>>>> mai successo.
>>>>>>>>>>>>
>>>>>>>>>>>> Il giorno 1 settembre 2017 11:06, Claudio <claud43 a gmail.com>
>>>>>>>>>>>> ha scritto:
>>>>>>>>>>>>
>>>>>>>>>>>>> ricercando in rete un problema simile o uguale è questo:
>>>>>>>>>>>>> https://community.ubnt.com/t5/airOS-Software-Configu
>>>>>>>>>>>>> ration/Client-isolation-WDS/td-p/1168067
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Wireless mailing list
>>>>>>>>>> Wireless a ml.ninux.org
>>>>>>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Wireless mailing list
>>>>>>>>> Wireless a ml.ninux.org
>>>>>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Wireless mailing list
>>>>>>>> Wireless a ml.ninux.org
>>>>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>>>>
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Wireless mailing list
>>>>>>> Wireless a ml.ninux.org
>>>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Wireless mailing list
>>>>>> Wireless a ml.ninux.org
>>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> Wireless mailing list
>>>>> Wireless a ml.ninux.org
>>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless a ml.ninux.org
>>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>>
>>>>
>>> _______________________________________________
>>> Wireless mailing list
>>> Wireless a ml.ninux.org
>>> http://ml.ninux.org/mailman/listinfo/wireless
>>>
>>>
>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless a ml.ninux.org
>> http://ml.ninux.org/mailman/listinfo/wireless
>>
>>
>
>
> --
> *Matteo Pedani*
>
> www.pedani.it
> mobile +39  3343637690 <334%20363%207690>
> phone +39 0699341466 <06%209934%201466>
> phone +39 069415152 <06%20941%205152>
>
>
>
>
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless
>
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20170904/a53d1978/attachment-0001.html>