[Ninux-Wireless] Firmware alice; era: [OpenWrt-Commits] r16393 - in trunk: target/linux/brcm63xx/files/drivers/mtd/maps target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx target/linux/brcm63xx/image tools/firmware-utils tools/firmware-util
Marco Giuntini
marco.giuntini a gmail.com
Mar 9 Giu 2009 12:01:58 CEST
Io ho due Router Adsl "Alice Gate 2 Plus Wi-Fi" (non hanno più il firmware
originale)
http://aiuto.alice.it/informazioni/modemadsl/alice_gate2adv.html
Purtroppo stasera non potrò venire in riunione, alla prox riunione li porto
per provare a metterci le mani.
Ciao
Marco
2009/6/9 Claudio <claudyus84 a gmail.com>
> A proposito di modem alice. Qualcuno ha già provato a caricarci
> openwrt? Funziona?
> I modelli qua riportati sono ancora attuali o già obsoleti?
>
> ---------- Forwarded message ----------
> From: <openwrt-commits a openwrt.org>
> Date: 2009/6/9
> Subject: [OpenWrt-Commits] r16393 - in trunk:
> target/linux/brcm63xx/files/drivers/mtd/maps
> target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx
> target/linux/brcm63xx/image tools/firmware-utils
> tools/firmware-utils/src
> To: openwrt-commits a lists.openwrt.org
>
>
> Author: florian
> Date: 2009-06-09 10:04:52 +0200 (Tue, 09 Jun 2009)
> New Revision: 16393
>
> Added:
> trunk/target/linux/brcm63xx/image/README.images-bcm63xx
> <CUT>
> Added: trunk/target/linux/brcm63xx/image/README.images-bcm63xx
> ===================================================================
> --- trunk/target/linux/brcm63xx/image/README.images-bcm63xx
> (rev 0)
> +++ trunk/target/linux/brcm63xx/image/README.images-bcm63xx
> 2009-06-09 08:04:52 UTC (rev 16393)
> @@ -0,0 +1,91 @@
> +The image neede to flash onto a Broadcom 63xx-series board depends on the
> +board, method you are using to flash, and, for web-based flash, on the
> version
> +of the Broadcom code your router uses.
> +
> +There are two major revisions of the Broadcom code as far as imagetags are
> +concerned, before 3.08 and after 3.08, however there are some variations
> +within in that, either due to vendor differences or due to changes at
> +Broadcom (it's not clear yet which is the case). In addtion Pirelli
> modified
> +the Broadcom code, so Alice Gate models use a different imagetag than any
> +other vendor.
> +
> +The imagetag format for flashing via CFE is the same for almost all the
> +boards, and is the same for all images generated by the imagetag utility.
> +Images flashable using cfe are labelled
> openwrt-<board>-<filesystem>-cfe.bin
> +
> +The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04
> imagetags
> +and is known to be correct as the source code GPL and is available for
> reading.
> +
> +Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536
> and
> +Tecom GW6000, and is the version of the flashing that was present before
> the
> +imagetags were split by broadcom code version (early June 2009)
> +
> +3.04 is guessed to be the same as 3.00-3.02 based on available information
> +
> +Broadom 3.06 is thought to be the same as 3.00-3.02, however the only 3.06
> +this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli)
> firmware
> +which is known to be different due to vendor (Pirelli) modifications to
> the
> +Broadcom code.
> +
> +Broadcom 3.08 introduced changes to the imagetag to deal with TR69 (a
> remote
> +router management system developed by the DSL Forum). The version we are
> +using as 3.08 is based on the BT Voyager firmware image I looked at. It
> may
> +in fact be BT Voyager-specific, and may in fact not be 3.08, but modified
> 3.06
> +and not apply to all 3.08 versions.
> +
> +Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and
> 3.12
> +versions, and has been tested on the Tecom GW6200. It is similar to 3.08.
> +There is a field for vendor-specific information, that at least in some
> cases
> +is not optional. It is based on the hexedit of a neufbox4 firmware image,
> the
> +information in https://dev.openwrt.org/ticket/4987, and the hexedit of a
> Tecom
> +GW6200 image.
> +
> +Some boards share the same tag format, but require vendor-specific fields
> in
> +the board. In that case the tagid is shared, but the filename of the
> generated
> +image reflects the router for which the image was created.
> +
> +router |method| codever |tagid |filename
>
> ++----------+------+---------+------+-------------------------------------------
> +|any |cfe | any |bccfe
> |openwrt-<board>-<filesystem>-bccfe-cfe.bin
> +|any |t/ftp | any |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +| |web |3.00-3.06|bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +| |web |3.08 |bc308
> |openwrt-<board>-<filesystem>-bc308-cfe.bin
> +| |web |3.10-3.12|bc310
> |openwrt-<board>-<filesystem>-bc310-cfe.bin
> +|CT536 |web |3.02 |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +|CT5621 |web |3.02 |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +|GW6000 |web |3.00 |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +|USR9108? |web |? |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +|USR9108? |web |? |bc310
> |openwrt-<board>-<filesystem>-bc310-cfe.bin
> +|DG834GT |web |3.02 |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +|V2500V |web |3.08 |bc308
> |openwrt-<board>-<filesystem>-btvgr-cfe.bin
> +|GW6200 |web |3.10 |bc310
> |openwrt-<board>-<filesystem>-gw6200-cfe.bin
> +|Neufbox4 |web |3.12 |bc310
> |openwrt-<board>-<filesystem>-nb4-cfe.bin
> +|F a ST2404 |web |? |bc300
> |openwrt-<board>-<filesystem>-bc300-cfe.bin
> +|F a ST2404 |web |? |bc310
> |openwrt-<board>-<filesystem>-bc310-cfe.bin
> +|AGVoIP2+Wi|web |alice3.06|ag306
> |openwrt-<board>-<filesystem>-agv2+w-cfe.bin
> +
> +Old imagetag routers
> +--------------------
> +Davolink DV201AMR
> +
> +Redboot routers
> +---------------
> +Inventel Livebox
> +
> +Known router->code versions
> +---------------------------
> +
> +Vendor |Model
> |Code Ver
>
> +---------------------------+------------------------------------------+--------
> +Comtrend |CT-5261
> |3.02
> +Comtrend |CT-536
> |3.02
> +Tecom |GW6000
> |3.00
> +Tecom |GW6200
> |3.10
> +Pirelli |Alice Gate Wi-Fi (+VoIP models?) |ag
> 3.06
> +? |TD-88xx
> |3.06
> +BT |Voyager V2500V
> |3.08 (?)
> +Belkin |F5D7633
> |3.10
> +Neuf ? |Neufbox 4
> |3.12
> +NetGear |DG834GT
> |3.02
> +Sagem |F a ST2404 |?
> +USR |9108 |?
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20090609/2186a6d0/attachment-0001.html>
Maggiori informazioni sulla lista
Wireless