[Ninux-Wireless] Fwd: alice gate plus

Aljoša Dorni joskic a gmail.com
Ven 18 Mar 2011 12:52:23 CET


---------- Forwarded message ----------
From: Aljoša Dorni <joskic a gmail.com>
Date: 2011/3/18
Subject: Re: [Ninux-Wireless] alice gate plus
To: "ZioPRoTo (Saverio Proto)" <zioproto a gmail.com>


Adesso su due piedi posso postarti il bootlog che mi fornisce il
firmware us robotics modificato da roleo (credo) proprio per questo
router.

Bootlog:
Linux version 2.6.8.1 (root a sarge) (gcc version 3.4.2) #1 Tue Feb 22
21:05:02 CET 2011
Parallel flash device: name AM29LV320MT, id 0x2201, size 8192KB
Total Flash size: 8192K with 135 sectors
***Board is not initialized****: Using the default PSI size: 24
AliceAGW2+ prom init
CPU revision is: 00029107
mpi: No Card is in the PCMCIA slot
Determined physical RAM map:
 memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
 DMA zone: 4000 pages, LIFO batch:1
 Normal zone: 0 pages, LIFO batch:1
 HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 64 (order 6: 512 bytes)
Using 128.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13696k/16000k available (1620k kernel code, 2284k reserved,
243k data, 80k init, 0k highmem)
Calibrating delay loop... 255.59 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...  unavailable.
NET: Registered protocol family 16
Can't analyze prologue code at 801a3a54
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 32, pci mem b0030000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:02.2: SCAN SetPortFeature wIndex=1 ports=2
ehci_hcd 0000:00:02.2: SCAN wValue =8
ehci_hcd 0000:00:02.2: SCAN SetPortFeature wIndex=2 ports=2
ehci_hcd 0000:00:02.2: SCAN wValue =8
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 32, pci mem b0010000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 32, pci mem b0020000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
ohci_hcd 0000:00:09.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:09.0 to 64
ohci_hcd 0000:00:09.0: irq 20, pci mem c0000b00
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:09.0: init err
ohci_hcd 0000:00:09.0: can't start
ohci_hcd 0000:00:09.0: init error -16
ohci_hcd 0000:00:09.0: remove, state 0
iounmap: bad address c0000b00
ohci_hcd 0000:00:09.0: USB bus 4 deregistered
ohci_hcd: probe of 0000:00:09.0 failed with error -16
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver usbnet
brcmboard: brcm_board_init entry
Confirm button interrupt has been configured
bcm963xx_serial driver v2.0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb a candelatech.com>
All bugs added by David S. Miller <davem a redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
atmapi: module license 'Proprietary' taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6348B0 Ethernet Network Device v0.3 Mar 22 2006 13:46:12
Config Internal PHY Through MDIO
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth0: MAC Address: 00:19:3E:11:40:8C
Broadcom BCM6348B0 Ethernet Network Device v0.3 Mar 22 2006 13:46:12
Config Ethernet Switch Through SPI Slave Select 0
eth1: MAC Address: 00:19:3E:11:40:8D
dgasp: kerSysRegisterDyingGaspHandler: eth1 registered
Broadcom BCM6348B0 USB Network Device v0.4 May 16 2006 15:44:12
usb0: MAC Address: 00 19 3E 11 40 8E
usb0: Host MAC Address: 00 19 3E 11 40 8F
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: using main board MAC address base in NVRAM (wombo board)
wl0 MAC Address: 00:19:3E:11:40:90
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.131.35.0.cpe0.0
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
fuse init (API version 7.8)
fuse distribution version: 2.7.3
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
BcmAdsl_Initialize=0xC0058218, g_pFnNotifyCallback=0xC006DB14
pSdramPHY=0xA0FFFFF8, 0xDEFEFFDD 0xDDFFFEFD
AdslCoreHwReset: AdslOemDataAddr = 0xA0FF68B0
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntrack
ip_conntrack_pptp version 2.1 loaded
ip_nat_pptp version 2.0 loaded
ip_conntrack_h323: init
ip_nat_h323: initialize the module!
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
device usb0 entered promiscuous mode
br0: port 1(usb0) entering learning state
br0: topology change detected, propagating
br0: port 1(usb0) entering forwarding state
device eth0 entered promiscuous mode
br0: port 2(eth0) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0) entering forwarding state
device eth1 entered promiscuous mode
br0: port 3(eth1) entering learning state
br0: topology change detected, propagating
br0: port 3(eth1) entering forwarding state
Country stored in PSI is IT
device wl0 entered promiscuous mode
br0: port 4(wl0) entering learning state
br0: topology change detected, propagating
br0: port 4(wl0) entering forwarding state
device wl0.1 entered promiscuous mode
br0: port 2(eth0) entering disabled state
br0: port 3(eth1) entering disabled state
br0: port 1(usb0) entering disabled state
eth1 Link UP.
br0: port 3(eth1) entering learning state
br0: topology change detected, propagating
br0: port 3(eth1) entering forwarding state

ciao

Il 18 marzo 2011 12:46, ZioPRoTo (Saverio Proto) <zioproto a gmail.com>
ha scritto:
>> posta un bootlog, sei al battlemesh?
>
> no di italiano siamo io e Clauz, Ninux Pisa (al completo), Ninux
> trento (antonio), e dovrebbe arrivare filippo ma ancora non si è visto
> !
>
> Saverio
>



--
Aljosa Dorni



-- 
Aljosa Dorni



Maggiori informazioni sulla lista Wireless