[Ninux-Wireless] aiutino script autoconfiguranti openwrt
Alessio Caiazza
nolith a abisso.org
Mar 11 Set 2012 10:57:11 CEST
2012/9/10 Alessandro (aka ArkaNet) <arkantiko a gmail.com>:
> Ciao ti rispondo in linea
>
> Il giorno 10 settembre 2012 22:03, Alessio Caiazza <nolith a abisso.org> ha
> scritto:
>
>> ok allora ci riprovo.
>>
>> Intanto ho già trovato delle incongruenze con quello che avevo fatto io.
>>
>>
>> Il giorno lunedì 10 settembre 2012, alle ore 19:32, Alessandro (aka
>> ArkaNet) ha scritto:
>>
>> [...]
>>
>> conta che poi la fonera è notoriamente lenta quindi non aspettarti
>> risposte extralusso :D
>>
>> Se parte già son felice
>
>
> lol
Misson complete!
È partita, però....
ho dovuto correggere un po' di cose nei file di conf autogenerati per
farlo entrare in mesh con la fonera che avevo configurato a mano.
cominciamo:
# cat /etc/config/eigennet
config 'section' 'general'
option 'debugLevel' '0'
option 'bootmode' '2'
config 'section' 'network'
option 'accept_clients' 'true'
option 'ip6addr_mesh' '2001:1418:17d:beeb::1/128'
option 'ip6addr_lan' '2001:1418:17d:beef::1/64'
option 'radvd_prefix' '2001:1418:17d:beef::/64'
option 'ip4addr_mesh' '172.16.63.2'
option 'netmask_mesh' '255.255.0.0'
option 'ip4addr_lan' '10.63.2.1'
option 'netmask_lan' '255.255.255.0'
list 'resolvers' '160.80.221.11 8.8.8.8'
option 'hostName' 'spike'
option 'wan_set' 'false'
option 'ip4_wan' '0.0.0.0'
option 'wan_mask' '0.0.0.0'
config 'section' 'olsrd'
option 'hna6' '2001:1418:17d:beef::'
option 'lan6prefix' '64'
option 'hna4' '10.63.2.0'
option 'gw_enable' 'false'
config 'section' 'snmp'
option 'Enable' 'true'
option 'Contact' 'nolith a abisso.org'
option 'Location' 'roaming spike'
config 'section' 'wireless'
option 'supernode' 'false'
option 'wifi_clients' 'true'
option 'wifi_mesh' 'true'
option 'countrycode' 'US'
option 'wifi_channel' '1'
option 'meshSSID' 'mesh.ninux.org'
option 'meshBSSID' '02:aa:bb:cc:dd:00'
option 'meshMcastRate' '6000'
option 'apSSID' 'ap.ninux.org'
option 'apKEY' 'none'
option 'apMaxClients' '25'
option 'tx_power' '10'
config 'section' 'hotspot'
option 'hs_enable' '1'
option 'hsMaxClients' '50'
option 'hsSSID' 'www.ninux.org'
option 'ip4addr_hs' '192.168.10.1'
option 'netmask_hs' '255.255.255.0'
config 'section' 'gw4server'
option 'enabled' 'false'
option 'strictCheck' 'false'
option 'checkInterval' '10s'
option 'bandwidth' '2000/512'
list 'checkHosts' '8.8.8.8'
list 'checkHosts' '8.8.4.4'
config 'section' 'pointing'
option 'enabled' 'true'
config 'section' 'bwtestclient'
option 'enabled' 'true'
config 'section' 'bwtestserver'
option 'enabled' 'true'
config 'section' 'sshserver'
option 'enabled' 'true'
option 'passwdAuth' 'true'
config 'section' 'httpinfo'
option 'enabled' 'true'
quindi /etc/init.d/eigenet start
dopo i 2 restart la situazione è:
# ifconfig
ath0 Link encap:Ethernet HWaddr 0A:18:84:12:0E:5D
inet addr:172.16.63.2 Bcast:172.16.255.255 Mask:255.255.0.0
inet6 addr: 2001:1418:17d:beeb::1/128 Scope:Global
inet6 addr: fe80::818:84ff:fe12:e5d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:1074 (1.0 KiB)
ath0-1 Link encap:Ethernet HWaddr 00:18:84:12:0E:5D
inet6 addr: fe80::218:84ff:fe12:e5d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:749 errors:0 dropped:749 overruns:0 frame:0
TX packets:504 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:21450 (20.9 KiB) TX bytes:86440 (84.4 KiB)
ath0-2 Link encap:Ethernet HWaddr 06:18:84:12:0E:5D
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::418:84ff:fe12:e5d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:880 (880.0 B)
br-lan Link encap:Ethernet HWaddr 00:18:84:12:0E:5C
inet addr:10.63.2.1 Bcast:10.63.2.255 Mask:255.255.255.0
inet6 addr: 2001:1418:17d:beef::1/64 Scope:Global
inet6 addr: fe80::218:84ff:fe12:e5c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:33028 errors:0 dropped:0 overruns:0 frame:0
TX packets:32266 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2663665 (2.5 MiB) TX bytes:3040777 (2.8 MiB)
eth0 Link encap:Ethernet HWaddr 00:18:84:12:0E:5C
inet6 addr: fe80::218:84ff:fe12:e5c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:32286 errors:0 dropped:0 overruns:0 frame:0
TX packets:32053 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3096746 (2.9 MiB) TX bytes:3024734 (2.8 MiB)
Interrupt:4 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wifi0 Link encap:UNSPEC HWaddr
00-18-84-12-0E-5D-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:113906 errors:0 dropped:0 overruns:0 frame:25906
TX packets:611 errors:69 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:195
RX bytes:18697803 (17.8 MiB) TX bytes:109872 (107.2 KiB)
Interrupt:3 Memory:b0000000-b000ffff
# brctl show
bridge name bridge id STP enabled interfaces
br-lan 8000.001884120e5c no eth0
ath0-1
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
br-lan no wireless extensions.
wifi0 no wireless extensions.
ath0-1 IEEE 802.11g ESSID:"ap.ninux.org"
Mode:Master Frequency:2.412 GHz Access Point: 00:18:84:12:0E:5D
Bit Rate:0 kb/s Tx-Power=10 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm
Rx invalid nwid:50 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ath0-2 IEEE 802.11g ESSID:"www.ninux.org"
Mode:Master Frequency:2.412 GHz Access Point: 06:18:84:12:0E:5D
Bit Rate:0 kb/s Tx-Power=10 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm
Rx invalid nwid:63 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ath0 IEEE 802.11g ESSID:"mesh.ninux.org"
Mode:Ad-Hoc Frequency:2.412 GHz Cell: 02:AA:BB:CC:DD:00
Bit Rate:0 kb/s Tx-Power=10 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm
Rx invalid nwid:64 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
olrsd4 non parte per la configurazione sbagliata, in
/etc/config/olrsd4 e anche nella versione ipv6
i campi hna{4,6} sono vuoti
la sezione interface è fatta così (senza nome dell'interfaccia)
Interface "" {
Mode "mesh"
}
oltre al problema di olrs non ho capito perché viene specificato il
BSSID della mesh, commentandolo in /etc/config/wireless sono riuscito
a far dialogare le due fonera.
Altra domanda: come faccio a rigenerare i file di configurazione con
eigennet senza usare firstboot? io vorrei che rigenerasse i file di
configurazione senza cambiare nulla nel sistema.
Per ora mi fermo qui, un passo alla volta.
Grazie,
nolith
--
Alessio "nolith" Caiazza
il sapere umano appartiene al mondo.
GPG 440C5437
Maggiori informazioni sulla lista
Wireless