[Ninux-Wireless] batman-adv e vlan su tplink

[Luca Postregna]

no, davo in pasto a bat0 la vlan 3 (o il bridge dove stava) che aveva solo
la porta fisica 1.

@lucapretto, il mio scopo è fare routing batman via ethernet, ho provato a
mettere solo la eth0.1 in bat0 ma non vede nulla. Ordex mi diceva che
potrebbe essere un problema legato al fatto che per far fungere
correttamente la cosa dovrei mettere in batman da entrambi i lati la stessa
vlan.

On Mon, Jan 21, 2013 at 4:34 PM, Alessandro Gnagni
<enterprise.nx a gmail.com>wrote:

> ma davi in pasto la vlan 3 con questa configurazione dello switch?
>
>
> 2013/1/21 Luca Postregna <luca.postregna a gmail.com>
>
>> ecco qua, tra l'altro in bat0 ho dovuto metterci tutta la br-mesh, e non
>> solo eth0.1
>>
>> root a kozlic:~# cat /etc/config/network
>>
>> config interface 'loopback'
>> option ifname 'lo'
>> option proto 'static'
>>  option ipaddr '127.0.0.1'
>> option netmask '255.0.0.0'
>>
>> config interface 'wan'
>>         option ifname 'eth0.2'
>>         option proto 'pppoe'
>>         option username 'XXX'
>>         option password 'XXX'
>>
>> config interface 'lan'
>> option ifname 'eth0.3'
>>  option type 'bridge'
>> option proto 'static'
>>  option ipaddr '192.168.0.1'
>> option netmask '255.255.255.0'
>>  option ip6addr '2001:470:1f09:79e::1/64'
>>
>> config interface 'henet'
>>          option proto '6in4'
>>         option peeraddr '216.66.80.26'
>>         option ip6addr '2001:470:1f08:79e::2/64'
>>         option tunnelid '190038'
>>         option username '9189d3307308cd85f9d908fb23935a94'
>>         option password 'XXX'
>>
>> config interface 'mesh'
>>  option ifname 'eth0.1 bat0'
>> option type 'bridge'
>>  option proto 'static'
>> option ip6addr '2001:470:6ae4:1000::1/64'
>>
>> config switch
>> option name 'rtl8366rb'
>> option reset '1'
>>  option enable_vlan '1'
>>
>> config switch_vlan
>> option device 'rtl8366rb'
>>  option vlan '1'
>> option ports '1 5t'
>>
>> config switch_vlan
>> option device 'rtl8366rb'
>> option vlan '2'
>>  option ports '0 5t'
>>
>> config switch_vlan
>> option device 'rtl8366rb'
>>  option vlan '3'
>> option ports '2 3 4 5t'
>>
>>
>> root a kozlic:~# cat /etc/config/batman-adv
>> config 'mesh' 'bat0'
>> option 'interfaces' 'br-mesh'
>>  option 'vis_mode' 'server'
>> option 'vis_data' 'dot'
>>
>>
>>
>> --
>> luca.postregna.name
>> twitter.com/lucapos <http://twitter.com/lucapost>
>>
>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless a ml.ninux.org
>> http://ml.ninux.org/mailman/listinfo/wireless
>>
>>
>
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless
>
>


-- 
luca.postregna.name
twitter.com/lucapost
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20130121/48d37075/attachment-0001.html>