[Ninux-Wireless] configurazione nodogsplash
starlight a libero.it
starlight a libero.it
Lun 7 Dic 2015 23:29:04 CET
Salve ragazzi,sicuramente stò configurando un router con nodogsplash e relativa paginetta in html.
funziona regolarmente su tutta la lan/wan internet,il problema viene fuori quando non è presente il gateway internet esce la pagina impossibile contattare il server .
come si può risolvere il problema si chiama un indirizzo esterno e non è presente internet?
questo il config openwrt caos calmer 15.05
------------------------------------------------------------------------------
config instance
# Set to 1 to enable nodogsplash
option enabled 1
# Use plain configuration file as well
#option config '/etc/nodogsplash/nodogsplash.conf'
option network 'WIRELESS'
option gatewayname 'Ninux '
option maxclients '250'
option idletimeout '1200'
# Your router may have several interfaces, and you
# probably want to keep them private from the network/gatewayinterface.
# If so, you should block the entire subnets on those interfaces, e.g.:
# list authenticated_users 'block to 192.168.0.0/16'
# list authenticated_users 'block to 10.0.0.0/8'
# Typical ports you will probably want to open up.
list authenticated_users 'allow tcp port 22'
list authenticated_users 'allow tcp port 53'
list authenticated_users 'allow udp port 53'
list authenticated_users 'allow tcp port 80'
list authenticated_users 'allow tcp port 443'
# For preauthenticated users to resolve IP addresses in their
# initial request not using the router itself as a DNS server,
list preauthenticated_users 'allow tcp port 53'
list preauthenticated_users 'allow udp port 53'
# Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
list users_to_router 'allow tcp port 22'
list users_to_router 'allow tcp port 23'
list users_to_router 'allow tcp port 53'
list users_to_router 'allow udp port 53'
list users_to_router 'allow udp port 67'
list users_to_router 'allow tcp port 80'
list users_to_router 'allow tcp port 443'
# See https://github.com/nodogsplash for a full list of available options.
grazie
Andrea
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20151207/b03f659e/attachment-0001.html>
Maggiori informazioni sulla lista
Wireless