[Ninux-Wireless] configurazione nodogsplash

[Daniele Capasso]

Il tuo messaggio finisce nella cartella spam, dubito che qualcuno l'abbia
letto.

2015-12-07 23:29 GMT+01:00 starlight a libero.it <starlight a libero.it>:

> Salve ragazzi,sicuramente stò configurando un router con nodogsplash e
> relativa paginetta in html.
> funziona regolarmente su tutta la lan/wan internet,il problema viene fuori
> quando non è presente il gateway internet esce la pagina impossibile
> contattare il server .
>
> come si può risolvere il problema si chiama un indirizzo esterno e non è
> presente internet?
>
> questo il config openwrt caos calmer 15.05
>
> ------------------------------------------------------------------------------
> config instance
>   # Set to 1 to enable nodogsplash
>   option enabled 1
>
>   # Use plain configuration file as well
>   #option config '/etc/nodogsplash/nodogsplash.conf'
>   option network 'WIRELESS'
>   option gatewayname 'Ninux '
>   option maxclients '250'
>   option idletimeout '1200'
>
>   # Your router may have several interfaces, and you
>   # probably want to keep them private from the network/gatewayinterface.
>   # If so, you should block the entire subnets on those interfaces, e.g.:
>   # list authenticated_users 'block to 192.168.0.0/16'
>   # list authenticated_users 'block to 10.0.0.0/8'
>
>   # Typical ports you will probably want to open up.
>    list authenticated_users 'allow tcp port 22'
>    list authenticated_users 'allow tcp port 53'
>    list authenticated_users 'allow udp port 53'
>    list authenticated_users 'allow tcp port 80'
>    list authenticated_users 'allow tcp port 443'
>
>   # For preauthenticated users to resolve IP addresses in their
>   # initial request not using the router itself as a DNS server,
>    list preauthenticated_users 'allow tcp port 53'
>    list preauthenticated_users 'allow udp port 53'
>
>   # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
>    list users_to_router 'allow tcp port 22'
>    list users_to_router 'allow tcp port 23'
>    list users_to_router 'allow tcp port 53'
>    list users_to_router 'allow udp port 53'
>    list users_to_router 'allow udp port 67'
>    list users_to_router 'allow tcp port 80'
>    list users_to_router 'allow tcp port 443'
>
>   # See https://github.com/nodogsplash for a full list of available
> options.
>
>
> grazie
>
> Andrea
>
>
> _______________________________________________
> Wireless mailing list
> Wireless a ml.ninux.org
> http://ml.ninux.org/mailman/listinfo/wireless
>
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.ninux.org/pipermail/wireless/attachments/20151209/f934265e/attachment-0001.html>