[IuliiNet] Firmware RB133
Filippo Madaro
filippo.madaro at gmail.com
Sun Jul 7 04:23:29 CEST 2013
Ok Funziona, ora provo a montare la seconda radio e vedo se regge ... il
carico
root at OpenWrt:/# cat /etc/config/wireless
config wifi-device radio0
option type mac80211
option channel 6
option hwmode 11g
option macaddr '00:0b:6b:22:bf:c1'
# option path 'pci0000:00/0000:00:01.0'
# option htmode 'HT40+'
# option chanbw 20
# option chanbw 5/10/20
option rxantenna 1
option txantenna 1
option distance 2500
option noscan 1
# option hwmode 11bgdt
option txpower 20
#
#
#
config wifi-iface
option device radio0
option network lan
option mode ap
option ifname ap0
option ssid wifi.fvg.it-ap
option hidden 0
option isolate 0
option maxassoc 10
# option short_preamble 1
# option wds 1
option encryption none
option disabled 0
config wifi-iface
option device radio0
option network mesh
# option mesh_id 67
option mode adhoc
option ifname adhoc0
option bssid '02:aa:bb:cc:dd:ee'
option ssid wifi.fvg.it-mesh
option hidden 0
option encryption none
# option mcast_rate 30
option disabled 0
root at OpenWrt:/# cat /proc/loadavg
1.14 0.94 0.70 1/31 4541
Il giorno 06 luglio 2013 12:50, Luca Postregna
<luca.postregna at gmail.com>ha scritto:
> ho apportato alcune delle modifiche suggerite, a me no di non configurare
> tutto a manina, cioè ogni singolo modulo, selezionando il profilo di
> default per le rb1xx, vengono selezionati automaticamente i moduli per la
> creazione delle vlan, quindi dobbiamo tenerci le eth1-eth4.
>
> Ecco i link aggiornati:
>
> -
> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/md5sums.txt
> -
> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/openwrt-adm5120-rb1xx-rootfs.tar.gz
> -
> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/openwrt-adm5120-rb1xx-vmlinux.elf
>
> A me su rb133c nessun problema con l'ap su ath5k. Questa la conf wifi:
>
> config wifi-device radio0
> option type mac80211
> option channel 11
> option hwmode 11g
> option path 'pci0000:00/0000:00:01.0'
>
> config wifi-iface
> option device radio0
> option network lan
> option mode ap
> option ifname ap0
> option ssid IuliiNet
> option encryption none
>
> config wifi-iface
> option device radio0
> option network wmesh
> option mode adhoc
> option ifname adhoc0
> option bssid '02:aa:bb:cc:dd:ee'
> option ssid IuliiNet-mesh
> option encryption none
>
> @emanuele, puoi provare le immagini?
>
>
>
>
>
> 2013/7/5 Filippo Madaro <filippo.madaro at gmail.com>
>
>> Ok testato con radio solo AP non trasmette ... quindi pezzo di Hardware
>> inutile...
>>
>> desidero un apparato con solo Networking Bridge + BATMAN + IPV4 + IPV6
>>
>> dal .config toglierei la configurazione delle VLAN 802.1q, le porte
>> ethernet delle RB153, il firewall, i led l'audio e la gpio, il PPP e PPPoE
>>
>> CONFIG_DEFAULT_admswconfig=n
>> CONFIG_DEFAULT_iptables=n
>> CONFIG_DEFAULT_kmod-ipt-nathelper=n
>> CONFIG_DEFAULT_kmod-leds-gpio=n
>> CONFIG_DEFAULT_kmod-ledtrig-adm5120-switch=n
>> CONFIG_DEFAULT_kmod-pata-rb153-cf=n
>> CONFIG_DEFAULT_ppp=n
>> CONFIG_DEFAULT_ppp-mod-pppoe=n
>> CONFIG_DEFAULT_uci=n
>> CONFIG_AUDIO_SUPPORT=n
>> CONFIG_GPIO_SUPPORT=n
>>
>> La radio di default la Ralink RT2561 ed i moduli per Atheros 5k e 9k ed
>> Intel IPW-2200
>>
>> CONFIG_DEFAULT_kmod-rt2500-pci=y
>>
>> togliere tutti i moduli e supporti per la criptatura WEP WPA ecc.
>>
>> togliere tutti i moduli RAID , Native Language Support (solo USA), le
>> Radio BroadComm, VIDEO, MAIL, DATABASE, CAPTIVE PORTAL, FILE TRANSFER solo
>> wget ed scp , ASTERISK e relativi supporti, INSTANT MESSAGE, VPN, WEB,
>> DIAL-IN, MULTIMEDIA
>>
>>
>> quando hai tempo e senza fretta, grazie Filippo
>>
>>
>>
>> Il giorno 05 luglio 2013 11:55, Luca Postregna <luca.postregna at gmail.com>ha scritto:
>>
>> piuttosto che mandarmi il .config delle opzioni kernel da rimuovere, se
>>> riesci fammi una lista
>>>
>>>
>>> 2013/7/5 Luca Postregna <luca.postregna at gmail.com>
>>>
>>>> ok, ma scrivi in ML!
>>>>
>>>>
>>>> 2013/7/5 Filippo Madaro <filippo.madaro at gmail.com>
>>>>
>>>>> Grazie Luca, il kernel gira e funziona quasi tutto, le radio Atheros
>>>>> le vede subito, le radio Ralink caricando i moduli da Attitude_Adjustment
>>>>> le vede, mentre per le radio Intel iwl-2/5xxx va in Kernel Panic.
>>>>> Ho caricato una configurazione Wireless con 1AP e 1Mesh con radio
>>>>> Atheros e tutte le "option disabled '0'" ma non trasmette nulla, il kernel
>>>>> non dà errori e carica le configurazioni correttamente, nel pomeriggio
>>>>> provo ad abilitare una sola interfaccia radio AP o Client e poi ti
>>>>> riferisco ...
>>>>> ho notato che gzip non funziona và spesso in crash out-of-memory e che
>>>>> il carico CPU è molto alto, top non mi rivela nessun carico strano mentre
>>>>> loadavg inizia ad 1.8 in avvio e scende ad 1.1 dopo una decina di minuti,
>>>>> normalmente con il firmware linux di mikrotik il carico CPU resta basso se
>>>>> non attivi quasi nulla.
>>>>> Penso che dovresti compilare ancora un kernel con solo le opzioni
>>>>> indispensabili, ti mando sempre questo pomeriggio il CONFIG di quello che
>>>>> ritengo indispensabile e ti faccio sapere se la radio trasmette ...
>>>>>
>>>>> Mandi Filippo
>>>>>
>>>>> ----- Messaggio originale -----
>>>>> Da: "Luca Postregna" <luca.postregna at gmail.com>
>>>>> A: "Filippo Madaro" <filippo.madaro at gmail.com>, iuliinet at ml.ninux.org
>>>>> Inviato: Giovedì, 4 luglio 2013 14:41:35
>>>>> Oggetto: Re: Firmware RB133
>>>>>
>>>>>
>>>>> c'era qualche problema con la branca stabile di a.a. su rb133c.
>>>>> ho quindi scaricato, compilato, e testato un firmware direttamente dal
>>>>> trunk.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/md5sums.txt
>>>>> *
>>>>> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/openwrt-adm5120-rb1xx-rootfs.tar.gz
>>>>> *
>>>>> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/openwrt-adm5120-rb1xx-vmlinux.elf
>>>>>
>>>>>
>>>>> @filippo, fammi sapere se hai risolto, da me tutto ok
>>>>>
>>>>>
>>>>> LP
>>>>>
>>>>>
>>>>>
>>>>> 2013/7/3 Filippo Madaro < filippo.madaro at gmail.com >
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ok e se puoi mandami una immagine del rootfs.tar.gz recente ne ho una
>>>>> Kamikaze ed una Backfire ma nessuna Attitude ...
>>>>>
>>>>>
>>>>> Grazie Filippo
>>>>>
>>>>>
>>>>>
>>>>> Il giorno 03 luglio 2013 18:46, Luca Postregna <
>>>>> luca.postregna at gmail.com > ha scritto:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> uhm. io ho testato solo su rb133c, sto ricompilando le immagini,
>>>>> quando è su dropbox ti avviso.
>>>>> LP
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 2013/7/3 Filippo Madaro < filippo.madaro at gmail.com >
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Sei sicuro che vada su RB133c ??? a me dá errore compilato senza
>>>>> emulazione FPU (soft-float)
>>>>>
>>>>>
>>>>>
>>>>> [ 1.772000] Creating 2 MTD partitions on "gen_nand":
>>>>> [ 1.780000] 0x000000000000-0x000000400000 : "kernel"
>>>>> [ 1.792000] 0x000000400000-0x000004000000 : "rootfs"
>>>>> [ 1.812000] mtd: partition "rootfs" set to be root filesystem
>>>>> [ 1.820000] ADM5120 built-in ethernet switch driver version 0.1.1
>>>>> [ 1.864000] adm5120_wdt: Watchdog Timer version 0.1
>>>>> [ 1.872000] TCP cubic registered
>>>>> [ 1.876000] NET: Registered protocol family 17
>>>>> [ 1.880000] 8021q: 802.1Q VLAN Support v1.8
>>>>> [ 1.892000] yaffs: dev is 32505859 name is "mtdblock3" ro
>>>>> [ 1.896000] yaffs: passed flags ""
>>>>> [ 2.744000] VFS: Mounted root (yaffs2 filesystem) readonly on device
>>>>> 31:3.
>>>>> [ 2.752000] Freeing unused kernel memory: 160k freed
>>>>> [ 3.248000] FPU emulator disabled, make sure your toolchain was
>>>>> compiled with software floating point support (soft-float)
>>>>>
>>>>>
>>>>> la scheda é una RB112 con CPU ADM5120 se invece installo kernel +
>>>>> rootfs Kamikaze vá tutto ma vorrei una versione recente tipo Attitude
>>>>>
>>>>>
>>>>> Mandi Filippo
>>>>>
>>>>>
>>>>>
>>>>> Il giorno 03 luglio 2013 17:58, Filippo Madaro <
>>>>> filippo.madaro at gmail.com > ha scritto:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Mi manca il file system openwrt-adm5120-rb1xx-rootfs.tar.gz
>>>>> ho quello vecchio della versione Kamikaze ma non l'ultimo
>>>>>
>>>>>
>>>>> Ciao Filippo
>>>>>
>>>>>
>>>>>
>>>>> Il giorno 03 luglio 2013 12:12, Luca Postregna <
>>>>> luca.postregna at gmail.com > ha scritto:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Gdrive, Mega e simile preferisco non usarli, non dispongono di un link
>>>>> diretto per il download. Diversamente, per dropbox tutto ok.
>>>>>
>>>>>
>>>>> Ecco i files per le rb133x:
>>>>>
>>>>>
>>>>> *
>>>>> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/md5sums.txt
>>>>> *
>>>>> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/openwrt-adm5120-rb1xx-vmlinux.bin
>>>>> *
>>>>> https://dl.dropboxusercontent.com/u/8635572/IuliiNet/firmware/openwrt-adm5120-rb1xx-vmlinux.elf
>>>>>
>>>>> le istruzione per il flash delle rb133c le puoi trovare alla pagina
>>>>> http://iulii.net/firmware.html#rb133c
>>>>> Se non ricordo male, questi binari contengono i moduli ath5k, forse
>>>>> anche ath9k. Firewall, dnsmasq, pppoe, credo di averli rimossi.
>>>>> Per un buggetto nella conf di default al primo boot trovi l'esempio
>>>>> per una rb1xx con 4 porte switch. Comunque, nel link sopra trovi una
>>>>> configurazione funzionante per rb133c.
>>>>>
>>>>>
>>>>> per quello che riguarda miniPCI 802.11n non ho recuperato alcun
>>>>> modello. Ho solo una b/g che mi ha passato Emanuele che utilizzo con
>>>>> l'antenna di un portatile.
>>>>>
>>>>>
>>>>> Saluti
>>>>> LP
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 2013/7/3 Filippo Madaro < filippo.madaro at gmail.com >
>>>>>
>>>>>
>>>>> Ciao Luca, ho cercato invano di scaricare i tre file per le RB133 da
>>>>> downloads.iulii.net ... non si apre il sito a noi poveri sfigati IPV4
>>>>> ... li puoi postare su Gdrive / Dropbox / Mega che ho un paio di schede da
>>>>> flashare.
>>>>>
>>>>> Per le miniPCI 802.11n hai poi trovato qualcosa di compatibile OpenWRT
>>>>> e con quante antenne 1/2/3 e quanti TX/RX 2T2R 3T3R ???
>>>>>
>>>>> Mandi Filippo
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> luca.postregna.name
>>>>> twitter.com/lucapost
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> p.i. Filippo Madaro
>>>>>
>>>>> Mob. 3883448904
>>>>> Consulente DUE Energie
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> p.i. Filippo Madaro
>>>>>
>>>>> Mob. 3883448904
>>>>> Consulente DUE Energie
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> luca.postregna.name
>>>>> twitter.com/lucapost
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> p.i. Filippo Madaro
>>>>>
>>>>> Mob. 3883448904
>>>>> Consulente DUE Energie
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> luca.postregna.name
>>>>> twitter.com/lucapost
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> luca.postregna.name
>>>> twitter.com/lucapost
>>>>
>>>
>>>
>>>
>>> --
>>> luca.postregna.name
>>> twitter.com/lucapost
>>>
>>
>>
>>
>> --
>> p.i. *Filippo Madaro*
>> Mob. 3883448904
>> Consulente DUE Energie <http://www.dueenergie.com/index.html>
>>
>>
>
>
> --
> luca.postregna.name
> twitter.com/lucapost
>
--
p.i. *Filippo Madaro*
Mob. 3883448904
Consulente DUE Energie <http://www.dueenergie.com/index.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ml.ninux.org/pipermail/iuliinet/attachments/20130707/aeb7bf0d/attachment-0001.html>
More information about the IuliiNet
mailing list